Home›Concealed or exposed fan coil unit: how to choose for a real building

Concealed or exposed fan coil unit: how to choose for a real building

Both types use the same coil, fan and casing family. The choice is about the building, not about performance — one goes above a ceiling, the other hangs in the room.

Concealed: quieter, tidier, harder to service

A concealed unit sits above the ceiling and is usually ducted to one or two diffusers. It is the better answer where the ceiling is high enough, where the client does not want equipment visible, and where the room needs a low noise level. The cost is service access: a filter clean or a valve adjustment means opening a ceiling panel, so put an access hatch in the design.

Exposed: visible, serviceable, slightly louder in the room

An exposed unit hangs below the ceiling and blows directly into the room. Nothing has to be opened to clean the filter, change a motor or bleed the coil. It is the right choice for retrofit work, plant rooms, workshops and buildings where ceiling void is too shallow for ducting.

The detail that decides it in practice

Check the ceiling void depth against the unit height plus insulation plus the drain slope. If the void is marginal, an exposed unit avoids a compromise on the drain — and a drain without slope is the most common reason a ceiling ends up wet.

Selection, quotation or technical support?
Mon–Sat 8:00–18:00 (GMT+8) · Wechat / WhatsApp available
Scroll to Top