DELENG fan coil unit cooling coils (all-copper tube with hydrophilic aluminium fin, anti-corrosion type) come direct from the Dezhou DELENG factory: reliable quality and non-standard custom builds, widely used in commercial projects, HVAC systems, custom project work and factory or commercial spaces.

This fan coil unit cooling coil (all-copper tube, hydrophilic aluminium fin, anti-corrosion type) uses φ9.52 mm copper tubes arranged 3 rows x 8 holes, 24 tubes in all, together with hydrophilic aluminium fins: high heat-exchange efficiency and good corrosion and weather resistance, so it suits fan coil units of every brand. DELENG can build to the fan coil model as a non-standard item, so send us your project data for selection.
Factory direct · custom builds · reliable quality
Copper for the key parts: good heat conduction and durability, with a long service life.
Corrosion-resistant treatment for humid, acidic and alkaline duties.
One unit, two duties: cooling in summer and heating in winter from the same chilled or hot water supply.
Smooth running and low-noise design, suited to bedrooms, offices and hotels where quiet matters.

| Model | Connection | Length (mm) | Width (mm) | Height (mm) | Weight (kg) |
| 34 | DN20 | 460 | 65 | 200 | 2.13 |
| 51 | DN20 | 580 | 65 | 200 | 2.54 |
| 68 | DN20 | 650 | 65 | 200 | 2.71 |
| 85 | DN20 | 780 | 65 | 200 | 3.32 |
| 102 | DN20 | 900 | 65 | 200 | 3.57 |
| 136 | DN20 | 1100 | 65 | 200 | 4.26 |
| 170 | DN20 | 1360 | 65 | 200 | 5.12 |
| 204 | DN20 | 1560 | 65 | 200 | 5.72 |
| 238 | DN20 | 1760 | 65 | 200 | 6.69 |
DELENG fan coil unit cooling coil · suited to many sites
Supply and replacement coils for fan coil units in malls, offices and hotels
Terminal heat exchange in chilled or hot water systems, for cooling and heating alike
Tube rows, dimensions and connection positions built to the unit drawing
Bulk fan coil unit supply for factories and large commercial premises
A: It uses 3 rows x 8 holes, 24 φ9.52 mm copper tubes in all, with DN20 connections, and fits fan coil units of every brand. Pick the overall dimensions that match the unit model; the table on this page lists length, width, height and weight for models from 34 upwards.
A: The copper tubes and circuit do not rust, and the hydrophilic treatment makes condensate spread into a film and drain away instead of hanging in droplets. That reduces water bridging between fins and mould growth, so heat exchange fades more slowly and the coil lasts longer in permanently damp conditions.
A: Yes. Tube rows, tube length, circuit routing, connection positions and overall dimensions are all built to the unit drawing or dimensions. Give us the unit model or a drawing and we can work out a proposal.
A: Fit it to the original connection positions and overall dimensions. Before connecting, confirm the water flow direction and the pipe slope. Joint with expansion or brazing and avoid distorting the copper tubes. After filling the system, vent it from the highest point and check every joint for leaks.
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
