A thermostatic actuator in the neck senses the supply air temperature and drives the blade angle — cold air blows horizontally in summer, warm air blows vertically in winter. No power supply, no manual operation, energy saving and maintenance free. Full range from φ200 to φ630.

The DELENG DL-W thermostatic swirl diffuser has a thermostatic actuator fitted in the neck, which senses the supply air temperature and drives the inner blades to change the supply angle. When the supply air temperature is 17 °C or below in summer, the blades move automatically to the cooling mode and the air is discharged horizontally; when the supply air temperature is 27 °C or above in winter, the blades move automatically to the heating mode and the air is discharged vertically. One diffuser therefore meets the supply requirement in both summer and winter.
The thermostatic actuator needs no manual operation, no power supply and no electrical control equipment: it is driven purely by the sensed temperature and is genuinely maintenance free. The outer frame is spun from quality aluminium sheet, giving high strength and good appearance, and the surface can be electrostatic powder coated. It is suitable for airports, station waiting halls, exhibition centres, theatres, stadiums and industrial plants with a floor-to-ceiling height above 3.8 m.
Service hotline: 0534-2555668
Senses the supply air temperature and switches between summer and winter modes automatically, without manual intervention.
No power supply, no wiring and no electrical control: driven purely by temperature.
Adjustable blades plus diffuser ring discharge a swirling jet at initial velocity, with long throw and wide coverage.
No motor and no electric mechanism — install it and forget it; it adjusts itself all year round.
When the supply air temperature is 17 °C or below, the thermostatic actuator drives the blades to the cooling angle and the cold air is discharged horizontally, spreading and sinking evenly.
When the supply air temperature in spring and autumn is in between, the blades stay at the middle angle, balancing the supply coverage automatically.
When the supply air temperature is 27 °C or above, the thermostatic actuator drives the blades to the heating angle and the warm jet is sent vertically into the occupied zone.

Unit mm · A outer diameter / B cut-out size / C duct connection
| Model | A outer dia (mm) | B cut-out (mm) | C duct (mm) | H1(mm) | H2(mm) |
|---|---|---|---|---|---|
| φ200 | 300 | 255 | 200 | 135 | 110 |
| φ250 | 360 | 315 | 250 | 145 | 110 |
| φ315 | 455 | 410 | 320 | 150 | 110 |
| φ350 | 500 | 449 | 350 | 155 | 110 |
| φ400 | 570 | 510 | 400 | 180 | 180 |
| φ450 | 640 | 570 | 450 | 215 | 145 |
| φ500 | 760 | 700 | 500 | 245 | 180 |
| φ630 | 865 | 800 | 630 | 295 | 200 |

Cooling throw measured at a 15° supply angle; heating throw at a 75° supply angle
| Model | Airflow (m³/h) | Pressure loss (Pa) | Noise dB(A) | Cooling throw (m) Δt=-8℃ |
Heating throw (m) Δt=+15℃ |
|---|---|---|---|---|---|
| φ200 | 300 | 10 | 23 | 1.7 | 1.4 |
| 500 | 28 | 35 | 3.0 | 2.6 | |
| 600 | 40 | 46 | 3.7 | 3.3 | |
| 800 | 82 | 51 | 5.0 | 4.5 | |
| 1000 | 99 | 56 | 6.0 | 5.3 | |
| φ250 | 300 | 10 | 23 | 1.7 | 1.4 |
| 500 | 28 | 35 | 3.0 | 2.6 | |
| 600 | 40 | 46 | 3.7 | 3.3 | |
| 800 | 82 | 51 | 5.0 | 4.5 | |
| 1000 | 99 | 56 | 6.0 | 5.3 | |
| φ315 | 500 | 23 | 25 | 1.8 | 1.5 |
| 800 | 60 | 36 | 3.1 | 2.7 | |
| 1100 | 100 | 45 | 3.5 | 3.1 | |
| 1300 | 142 | 52 | 4.7 | 4.2 | |
| 1600 | 205 | 57 | 6.0 | 5.3 | |
| φ350 | 500 | 23 | 25 | 1.8 | 1.5 |
| 800 | 60 | 36 | 3.1 | 2.7 | |
| 1100 | 100 | 45 | 3.5 | 3.1 | |
| 1300 | 142 | 52 | 4.7 | 4.2 | |
| 1600 | 205 | 57 | 6.0 | 5.3 | |
| φ400 | 800 | 11 | 27 | 2.7 | 2.2 |
| 1200 | 25 | 38 | 3.8 | 3.2 | |
| 1600 | 43 | 47 | 5.2 | 4.3 | |
| 2000 | 68 | 53 | 6.5 | 5.3 | |
| 2400 | 102 | 58 | 7.7 | 6.5 | |
| φ500 | 1200 | 12 | 28 | 2.1 | 1.7 |
| 1600 | 23 | 39 | 3.2 | 2.8 | |
| 2000 | 29 | 45 | 3.6 | 3.2 | |
| 3000 | 82 | 52 | 5.3 | 4.6 | |
| 3500 | 96 | 58 | 6.2 | 5.5 | |
| φ630 | 1900 | 19 | 30 | 3.4 | 3.0 |
| 2600 | 33 | 40 | 4.2 | 3.8 | |
| 3300 | 50 | 46 | 5.7 | 5.3 | |
| 4000 | 86 | 55 | 6.9 | 6.4 | |
| 4800 | 128 | 59 | 8.4 | 7.7 |
Can be installed together with a volume control damper or a plenum box, with suspended fixing; no electrical connection is needed — ready to use once installed.
A: The dimensions, airflow, pressure loss and noise are exactly the same. The difference is the blade adjustment: the manual version has to be set by hand at height; the motorised version has a built-in actuator with remote electrical control; the thermostatic version has a built-in thermostatic actuator that adjusts purely by the air temperature — no power, no attention, the most carefree of the three.
A: The actuator is charged with a temperature-sensitive medium that expands and contracts with the air temperature to drive the blade mechanism. It has no power supply, no motor and no wearing moving parts, so it is essentially maintenance free once installed.
A: Select the model from the space volume and the required airflow, using the airflow – pressure loss – throw data in the table above. Send us the project drawings and DELENG technical staff will help with selection, tel. +86 534 2555668.
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
