Home›Products ›Valves & Fittings ›Fan Coil Unit Motorised Ball Valve

Fan Coil Unit Motorised Ball Valve

DeLENG HVAC · Direct from our Dezhou factory  

Fan Coil Unit Motorised Ball Valve

DeLENG fan coil motorised ball valves are driven by a bidirectional motor and work with the thermostat to control chilled and hot water flow precisely, adjusting the opening degree to keep HVAC system temperature in dynamic balance — energy-saving and comfortable.

Motorised ball valveBidirectional motor driveThermostat interlockPrecise flow controlAdjustable opening degree  
DeLENG fan coil motorised ball valve — Dezhou factory

Product overview

The fan coil motorised ball valve is designed for precise flow control in chilled and hot water systems. Working closely with the thermostat, it responds to temperature changes in real time, controls the chilled or hot medium flow precisely and keeps room temperature constant.

A high-performance bidirectional motor delivers fast response and stable running. The thermostat samples site data continuously and sends control signals that precisely open and close the valve, setting the opening degree so that flow matches actual demand for efficient energy use.

The actuator drives the valve open and closed through metal transmission parts, for dependable quality. The product is mainly used for on/off control in HVAC, central heating and water supply systems. It consists of an actuator and a valve body; the actuator is driven by a synchronous motor — noiseless with consistent action — and has built-in travel limit switches that cut the power at fully open or fully closed positions.

The body is forged brass with a sand-blasted finish, driven by metal transmission parts, made from quality raw material with precise workmanship and thickened overall for reliable pressure resistance and durability.

Service hotline:0534-2555668

Key features · fan coil motorised ball valve

Precise regulation · bidirectional motor · thermostat interlock · energy saving

P

Precise regulation

Controls chilled or hot medium flow to demand, avoiding sharp temperature swings.

B

Bidirectional motor drive

A high-performance bidirectional motor gives fast response and stable running.

T

Thermostat interlock

The thermostat sends control signals that keep the chilled or hot medium in dynamic balance.

E

Energy saving

Precise flow control keeps room temperature stable and saves energy.

Selling points

DeLENG fan coil motorised ball valve — Dezhou factory

Operating principle

Control mode Operating principle
Three-wire, single control
Normally open / normally closed
The actuator is driven by a bidirectional synchronous motor. One live wire (brown) and one neutral wire (blue) must be permanently powered; a second live wire (black) switches the normally open or normally closed circuit.
Normally open type: the valve closes when the actuator is powered, and opens automatically when the power is removed.
Normally closed type: the valve opens when the actuator is powered, and closes automatically when the power is removed.
Three-wire, two control The actuator is driven by a bidirectional synchronous motor and uses three wires: a live wire for opening (black), a live wire for closing (brown) and a common neutral (blue). Switching between the two live wires operates a three-way or two-way switch; whichever wire is energised does the work, with 90° forward and reverse rotation. Energising the open wire opens the valve, switching to the close wire closes it, and the actuator cuts its own power when the valve reaches the end position.
Signal with feedback The actuator is driven by a bidirectional synchronous motor; the open and close circuits are powered separately and the actuator cuts its own power at the end position. A voltage feedback signal is provided once the valve is fully open or closed.

Product parameters

Motor type Synchronous motor Nominal pressure PN16
Power cable length 300mm Medium temperature 15~95℃
Travel time 15 s / 30 s Actuator torque 3N.M/4N.M/8N.M
Connection G pipe thread Power consumption 6 W (only while the valve is opening)
Close-off differential pressure ≤0.4MPa Medium Chilled or hot water, or 50% glycol solution
Electrical specification (50/60Hz) 24VAC/110VAC/220VAC

Overall dimensions

DeLENG fan coil motorised ball valve — Dezhou factory

Product specification Size Product dimensions (mm) Kv value
Mpa
Net weight
KG
H L L1
Two-way DN15(1/2) 127 51 – – 0.48
DN20(3/4) 135 58 – – 0.55
DN25(1) 140 65 – – 0.64
DN32(1-1/4) 152 76 – – 0.87
DN40(1-1/2) 157 85 – – 0.95
Three-way DN15(1/2) 127 56 43 – 0.54
DN20(3/4) 136 68 53 – 0.67
DN25(1) 141 78 61 – 0.83
DN32(1-1/4) 159 98 76 – 1.3
DN40(1-1/2) 173 120 94 – 2.3

Valve body parameters are for reference only and may change without notice; the company reserves the right of interpretation.

Wiring diagram

DeLENG fan coil motorised ball valve — Dezhou factory

Product photos

DeLENG fan coil motorised ball valve — Dezhou factory

Selling points

Quality raw material · thickened body · fine workmanship

DeLENG fan coil motorised ball valve — Dezhou factory

Quality raw material

Forged brass body made from quality raw material with fine workmanship

DeLENG fan coil motorised ball valve — Dezhou factory

Thickened body

Thickened body design for reliable pressure resistance and long service

DeLENG fan coil motorised ball valve — Dezhou factory

Fine workmanship

Sand-blasted finish with carefully executed workmanship

Performance parameters

Parameter Value Parameter Value
Motor type Synchronous motor Nominal pressure PN16
Power cable length 300mm Medium temperature 15~95℃
Travel time 15 s / 30 s Actuator torque 3N.M / 4N.M / 8N.M
Connection G pipe thread Power consumption 6 W (only while the valve is opening)
Close-off differential pressure ≤0.4Mpa Medium Chilled or hot water, or 50% glycol solution
Electrical specification (50/60Hz) 24VAC / 110VAC / 220VAC

Dimension drawing

DeLENG fan coil motorised ball valve — Dezhou factory
Specification Size H(mm) L(mm) L1(mm) Kv value (MPa) Net weight (kg)
Two-way DN15(1/2) 127 51 — 0.48 —
DN20(3/4) 135 58 — 0.55 —
DN25(1) 140 65 — 0.64 —
DN32(1-1/4) 152 76 — 0.87 —
DN40(1-1/2) 157 85 — 0.95 —
DN50(2) 170 96 — 1.36 —
Three-way DN15(1/2) 127 56 43 0.54 —
DN20(3/4) 136 68 53 0.67 —
DN25(1) 141 78 61 0.83 —
DN32(1-1/4) 159 98 76 1.3 —
DN40(1-1/2) 173 120 94 2.3 —

Note: dimensions and parameters are for reference only and may change without notice; the company reserves the right of interpretation.

Product photos

DeLENG factory direct · photographed on site

DeLENG fan coil motorised ball valve — Dezhou factory

Side view: brass body + motorised actuator

DeLENG fan coil motorised ball valve — Dezhou factory

Body connection: pipe thread detail

DeLENG fan coil motorised ball valve — Dezhou factory

Single unit, front view: overall structure

DeLENG fan coil motorised ball valve — Dezhou factory

Two units side by side: symmetrical layout

DeLENG fan coil motorised ball valve — Dezhou factory

Actuator: synchronous motor drive

DeLENG fan coil motorised ball valve — Dezhou factory

Configurations: two-way / three-way available

Applications · precise flow control

C

Central air conditioning

Commercial and residential HVAC systems

H

Heating

Precise control of hot water flow

C

Commercial offices

Offices in commercial buildings

R

Residential

Stable residential temperatures

FAQ

Q: How is the motorised ball valve wired to the thermostat?

A: The valve and actuator are opened and closed by the thermostat’s switching signal: two-wire control gives open/close states, three-wire control adds a common wire. Supply can be 24 VAC, 110 VAC or 220 VAC (50/60 Hz); connect to the terminals shown in the wiring diagram on this page. The control lead is a 300 mm power cable.

Q: How should travel time and torque be chosen?

A: Travel time comes in 15 s and 30 s versions, and actuator torque in 3 N·m, 4 N·m or 8 N·m. Match them to valve size and the close-off differential pressure required (≤0.4 MPa): larger sizes and higher pressures call for higher torque.

Q: Which media and temperatures are supported?

A: Chilled or hot water, or 50% glycol solution, with medium temperature 15-95 ℃ and nominal pressure PN16. Widely used for on/off control of central air-conditioning water systems, heating supply/return and fan coil water circuits.

Q: Two-way or three-way, and which sizes?

A: Two-way valves give on/off control of supply and return; three-way valves can combine or divert flow. Standard sizes include DN15 (1/2″) and DN20 (3/4″), with G pipe thread connections and power consumption of only 6 W while the valve is opening.

Related products

Central AC Unit Filter (Custom / Standard / Folded)

Central AC Unit Filter (Custom / Standard / Folded)

Product showcase

View details →

Silicone Canvas Duct Connector (Multi-flange)

Silicone Canvas Duct Connector (Multi-flange)

Product showcase

View details →

TDF Flange Duct Flexible Connector (Multi-type, Custom)

TDF Flange Duct Flexible Connector (Multi-type, Custom)

Product showcase

View details →

AHU Drain Pan (Galvanised / Stainless, Custom)

AHU Drain Pan (Galvanised / Stainless, Custom)

Product showcase

View details →

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a fan Coil Unit Motorised Ball Valve?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top