DeLENG motorised two-way valves come direct from our Dezhou factory: reliable quality, non-standard sizes customised, widely used in commercial projects, HVAC systems, project-specific builds and factory or commercial spaces.

The DeLENG motorised two-way valve belongs to our fan coil motorised valve range and controls the water circuit of air-conditioning terminals. The thermostat drives the valve motor; a reduction gear and return spring open or close the valve, starting or stopping the flow through the pipe, and the fan coil delivers air so that room temperature is controlled automatically. On power failure the spring returns the valve firmly to the normally closed position, preventing the coil from freezing or the room temperature from running away. Widely used in office buildings, hotels, apartments and shopping malls.
Features: forged brass valve body, stainless steel base and aluminium housing; driven by a fully enclosed unidirectional hysteresis synchronous motor with spring return; normally closed two-way type with a manual opening function; actuator and body can be removed and refitted quickly without tools, which makes operation very convenient.
Service hotline:0534-2555668
Factory direct · customisable · reliable quality
On power failure the spring returns the valve firmly to the normally closed position, preventing coil freezing or loss of room temperature control — safe and reliable.
A forged brass body: corrosion-resistant, high strength and stable over long service.
A hysteresis synchronous motor runs smoothly and quietly, suited to noise-sensitive spaces.
A manual override makes installation, commissioning and fault handling much easier.
| Item | Parameter |
|---|---|
| Supply voltage | AC220V±10% / AC24V±10% 50Hz |
| Power | 7W |
| Nominal pressure | 1.6MPa |
| Housing protection class | IP20 |
| Valve travel time | Opening ≤18 s; closing ≤7 s |
| Operating conditions | Ambient 0-40 ℃; medium 0-95 ℃ |
| Medium | Water and glycol solutions up to 60% |
DeLENG motorised two-way valve dimension drawing (front and side view, mm)

DeLENG motorised two-way valve model dimension table (mm)
| Model | A(mm) | B(mm) | C(mm) |
|---|---|---|---|
| FCG2-15A | 70±1 | 22.5±1 | 86±1 |
| FCG2-20A | 79±1 | 22.5±1 | 90±1 |
| FCG2-25A | 88±1 | 22.5±1 | 95±1 |
Before installation, stop the pump, isolate the power and release the pressure in the pipework.
The differential pressure between supply and return pipes must stay within the permissible range.
The arrow on the valve body must follow the direction of flow.
Install the valve where it is easy to reach for installation and maintenance.
The valve is normally installed vertically with the motor above the body, and away from damp conditions.
The body and pipe must be naturally coaxial to avoid stress damage or leakage; fit the body with an open-end wrench — never a pipe wrench, which would damage it.
DeLENG motorised two-way valve with fan coil unit — installation and wiring diagram

DeLENG motorised two-way valve — product photos
DeLENG motorised two-way valve · suitable for many applications
Applications of the DeLENG motorised two-way valve
Applications of the DeLENG motorised two-way valve
Applications of the DeLENG motorised two-way valve
Applications of the DeLENG motorised two-way valve
Commercial projects, HVAC systems, project-specific builds, factories and commercial spaces. As a Dezhou manufacturer we can propose a suitable solution for the actual project requirement.
Yes. We build to project drawings: size, material and surface finish can be selected as needed — send us your project parameters to discuss.
Yes. Dezhou DeLENG Air Conditioning Co., Ltd. manufactures HVAC equipment and sells direct and uses no resellers, backed by in-house R&D and production.
We hold stock at our Dezhou, Shandong factory and ship quickly, and we also build to samples — call 0534-2555668 for selection advice.
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
