Home›Products ›Thermostats & Controls ›DELENG WSK-8K Fresh-Air LCD Controller
DeLENG · factory direct supply

DELENG WSK-8K Fresh-Air LCD Controller

Fresh-air LCD controller for heat-recovery and ducted ventilators: backlit LCD showing room temperature, fan speed and clock, three fan speeds, weekly on/off timer, dust-collection key, optional IR remote, standard 86-type wall box, rated output up to 600 W.

DELENG WSK-8K Fresh-Air LCD Controller

DELENG WSK-8K Fresh-Air LCD Controller

Product introduction

The DELENG WSK-8K is a dedicated LCD timer controller for fresh-air units. A backlit LCD shows room temperature, setpoint, current fan speed, time and weekday. Six keys on the panel (power, fan speed, timer, bypass, up, down) switch high / mid / low fan steps directly on the AC three-speed motor. Its 7-pin terminal block (N / high / mid / low / open / close / L) drives both the fan and the electric valve, with rated output up to 600 W. The white flame-retardant ABS panel measures 86 × 86 mm with a 13 mm panel depth and 27 mm overall depth, and fits a standard 86-type wall box.

Selection & quotation: +86 534 2555668

Product features · WSK-8K controller

LCD Display

Backlit LCD shows room temperature, setpoint, fan speed, time and weekday at a glance.

Three Fan Speeds

High / mid / low steps switch the AC three-speed motor of the fresh-air unit directly.

Timer & Schedule

Weekly on/off timer; the unit stops automatically in unoccupied hours.

Flame-Retardant ABS

White flame-retardant ABS panel, standard 86-type wall box, 13 mm panel, 27 mm overall depth.

Selling points

WSK-8K fresh-air LCD controller screen function callouts

LCD · temperature / speed / clock
WSK-8K fresh-air controller 7-pin terminal block

7-pin terminal · fan speeds + valve
Fresh-air units compatible with the WSK-8K controller

Compatible units · heat recovery / bidirectional / single duct

WSK-8K fresh-air LCD controller technical parameters

Parameter Value
Brand DELENG
Model WSK-8K
Product Fresh-air LCD controller (timer + 3-speed switch)
Rated voltage AC 220V ±10%, 50/60 Hz
Power consumption 1.5 W
Max load 3 A resistive (rated output ≤ 600 W)
Temperature accuracy 0.5 °C
Temperature range 5 °C – 35 °C
Sensor NTC thermistor
Control steps High / mid / low + valve open / close
Timer Weekly on/off timer with clock and weekday
Remote control Optional infrared remote
Dimensions 86 × 86 mm panel, 13 mm panel depth, 27 mm overall depth
Housing White flame-retardant ABS
Mounting Standard 86-type wall box
DELENG WSK-8K fresh-air controller dimensions, 86 x 86 mm panel, 13 mm panel, 27 mm overall depth
WSK-8K controller rear and side dimensions, 86 x 86 mm, 13 / 27 / 57 mm
DELENG WSK-8K wiring diagram, terminals for fan three speeds and electric valve

Terminals 1-4 are neutral plus high / mid / low fan steps, terminals 5/6 (open / close) drive the electric valve and terminal 7 is line. Isolate the supply before wiring and tighten all screws before energising.

Product photos

WSK-8K fresh-air controller front view, LCD reading 26.8 C
WSK-8K fresh-air controller rear with 7-pin terminal block
WSK-8K fresh-air controller side view, 13 mm panel, 27 mm overall depth
WSK-8K controller rear panel rated output 600 W

Applications & optional remote

The WSK-8K suits heat-recovery ventilators, bidirectional fresh-air units and single-duct ventilators, and is a direct replacement for the original three-speed switch whenever the unit uses an AC 220V three-speed motor. On single- or double-speed units the unused speed steps simply stay empty.

Where remote operation is needed, the optional infrared remote covers power on/off, fan speed and manual / timer mode. For unattended sites the built-in weekly timer starts and stops the unit automatically.

Fresh-air units compatible with the WSK-8K: heat-recovery, bidirectional and single-duct

FAQ

Q:Which fresh-air units does the WSK-8K fit?

A:Any unit driven by an AC 220V three-speed motor: heat-recovery ventilators, bidirectional ventilators and duct fans. On single- or double-speed units the spare speed steps simply stay empty.

Q:Can it drive a motorised damper at the same time?

A:Yes. Terminals 5/6 (open / close) feed the electric valve, so the fan and the valve act together and the valve closes when the controller is switched off.

Q:How much load can it carry?

A:Rated output ≤ 600 W, max 3 A resistive. Keep at least 20% headroom when driving inductive motor loads.

Q:How is the timer set?

A:Press the TIMER key, set the ON time, then the OFF time and the weekday; the schedule then repeats weekly.

Q:What is the bypass / dust-collection key for?

A:It switches the electronic dust collector or bypass damper on and off, without affecting fan speed control.

Q:Is a remote control available?

A:Yes, an optional infrared remote; the receiver window is marked on the rear of the panel.

Q:What warranty do you offer?

A:Three-year warranty on the complete unit, free repair for non-human damage.

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need WSK-8K Fresh-Air LCD Controller?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top