Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator — direct from our Dezhou factory: reliable quality and non-standard customisation, widely used in commercial projects, HVAC systems, project-specific builds and factory or commercial spaces.

The DJZ series hanger spring isolator is a spring mount made for suspended equipment. Built around a quality helical spring and damping structure, it offers high damping, a low natural frequency and easy installation. It absorbs and attenuates vibration from running equipment and is notably effective against structure-borne noise, so it is widely used for suspended ceiling air conditioners, supply and exhaust fans, axial fans, fresh-air units and pipework.
The DeLENG DJZ series covers a wide load range (5-1000 kg) with a full set of sizes, so a suitable model can be matched to equipment weight and site conditions, reducing vibration transmission and structural noise while protecting both equipment and building structure. Non-standard versions are available, built to project drawings — call us for selection advice.
Service hotline:0534-2555668
High damping · low natural frequency · easy installation · wide load range
A quality helical spring with damping structure gives high damping and good isolation, absorbing vibration from running equipment.
A low natural frequency gives clear vibration and noise isolation, with a marked effect on structure-borne noise.
Compact and easy to install, suited to suspended ceiling air conditioners, fans, fresh-air units and pipework.
Loads from 5 kg to 1000 kg with a full size range, matching different equipment weights and installation conditions.
DJZ series hanger spring isolator dimension drawing (unit photo with engineering dimensions)

DJZ series hanger spring isolator model dimension table (mm)
| Model | Load range (kg) | Overall dimensions (mm) | Screw | ||
|---|---|---|---|---|---|
| H | Upper A | Lower A | |||
| DJZ-0 | 0-10 | 80 | 40 | 40 | M8*100 |
| DJZ-1 | 5-20 | 80 | 60 | 60 | M8*100 |
| DJZ-2 | 15-30 | 100 | 50 | 50 | M10*100 |
| DJZ-3 | 30-50 | 100 | 50 | 50 | M10*120 |
| DJZ-4 | 50-80 | 120 | 60 | 60 | M12*120 |
| DJZ-5 | 80-120 | 120 | 60 | 60 | M12*120 |
| DJZ-6 | 120-160 | 140 | 80 | 80 | M14*140 |
| DJZ-7 | 160-200 | 140 | 80 | 80 | M14*140 |
Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator · photographed at our factory
Note: the dimensions above are for reference; the actual product and project selection take precedence.
Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator · suitable for many applications
Applications of the Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator
Applications of the Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator
Applications of the Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator
Applications of the Dezhou DeLENG DJZ Series Hanger Spring Vibration Isolator
A: First work out the total equipment weight (including ductwork, pipework and accessories), distribute it evenly across the hanger points with a 1.2 safety factor, then select the model from the XHS series dimension table on this page according to the load per point.
A: A quality helical spring with damping structure gives a low natural frequency and high damping, clearly isolating running vibration and structure-borne noise from suspended fans and AHU units, so floor resonance and noise drop markedly.
A: Keep the hanger rods vertical and the load even between points; the spring must not be eccentrically or laterally loaded. Level the equipment after installation, then release the limit bolts gradually.
A: Yes. Spring stiffness and overall dimensions are tailored to equipment weight, number of hanger points, installation height and available space — just send us the equipment parameters.
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
