Home›Products ›Cooling Coils & Heaters ›Dezhou DELENG 30-tube φ7 mm Copper Coil for Fan Coil Units

Dezhou DELENG 30-tube φ7 mm Copper Coil for Fan Coil Units

DEZHOU DELENG · FACTORY DIRECT SUPPLY

30-tube φ7 mm Copper Coil for Fan Coil Units

DELENG 30-tube φ7 mm all-copper cooling coils cover every model from 34 to 238: fin width is a uniform 40 mm, headers run from 4-in/4-out up to 8-in/8-out, connections are DN20, and the coil gives high heat-exchange efficiency with strong pressure resistance.

30 x φ7 mm tubesFin width 40 mm4/4 to 8/8 headersDN20 portsCustom sizes

DELENG 30-tube φ7 mm copper coil for fan coil units

Product introduction

The Dezhou DELENG 30-tube φ7 mm copper coil is a high-efficiency heat-exchange part made for fan coil units, covering every model from 34 to 238. Fin width is a uniform 40 mm and fin length steps up with the model from 460 mm (model 34) to 1760 mm (model 238); the header is a multi-inlet/outlet type (4-in/4-out to 8-in/8-out); connections are DN20 (male thread 25 mm, 3/4 inch).

The core is 30 seamless φ7 mm copper tubes with strong pressure resistance and fast heat exchange, matched with high-density hydrophilic aluminium fins in a compact arrangement, and a pure copper header that keeps the water flow steady. Sizes can be customised and the coil adapted to the brand of unit.

Service hotline: +86 534 2555668

Key features · 30-tube φ7 mm copper coil

30 x φ7 mm · multi-inlet/outlet · hydrophilic fin · brand adaptation

3

30 x φ7 mm

30 seamless φ7 mm copper tubes: strong pressure resistance and fast heat exchange.

M

Multi-inlet/outlet

A pure copper header from 4-in/4-out to 8-in/8-out keeps the water flow steady.

H

Hydrophilic fin

High-density hydrophilic aluminium fins in a compact layout for efficient heat exchange.

B

Brand adaptation

Sizes customised and coils adapted to the brand of unit.

Selling points

30-tube copper cooling coilPure copper tubesHydrophilic aluminium fin heat exchange
Selection note: sizes and brand adaptations are made to order. Call us on +86 534 2555668.

Dimension drawing

Fin length is built to the unit model, fin width is a uniform 40 mm, and connections are DN20 (male thread 25 mm, 3/4 inch)

30-tube φ7 mm copper coil dimension drawing: DN20 male thread connections 25 mm 3/4 inch, fin length customisable, fin width 40 mm

Dimension table

Fin width is a uniform 40 mm; fin length and header arrangement by model are as follows

Model Fin length Header
34 460mm 4 in / 4 out
51 580mm
68 650mm 5 in / 5 out
85 780mm
102 900mm
136 1100mm 6 in / 6 out
170 1360mm
204 1560mm
238 1760mm 8 in / 8 out

Applications · demanding heat-exchange duties

E

Efficient heat exchange

Where the existing unit falls short on cooling capacity and more heat exchange is needed

S

Steady water flow

A multi-inlet/outlet header distributes the water without flow bias

R

Replacement

Repair or replacement of old coils that leak or have fouled fins

B

Brand adaptation

Matched to the dimensions and connection positions of each brand of unit

FAQ

Q: How does a 30-tube φ7 mm coil differ from the standard version?

A: The 30 seamless φ7 mm copper tubes are packed more densely, so the same footprint gives more heat-exchange area and faster transfer, and the tube wall takes pressure well. It suits units that are short on cooling capacity or duties with high heat-exchange demands.

Q: Which fan coil unit models does it fit?

A: Every model from 34 to 238: fin width is a uniform 40 mm, fin length steps up with the model from 460 mm (model 34) to 1760 mm (model 238), and connections are DN20 (male thread 25 mm, 3/4 inch).

Q: How is the header configured, and what does it affect?

A: A pure copper header is used, with multi-inlet/outlet arrangements by model from 4-in/4-out to 8-in/8-out. Water is distributed evenly with low resistance, so flow bias does not leave parts of the coil under-performing.

Q: Can you adapt the coil to a specific brand?

A: Yes. We match the overall dimensions, connection positions and header type of each brand of unit. Send the unit model or a drawing and we can work out a proposal; sizes are made to order.

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a dezhou DELENG 30-tube φ7 mm Copper Coil for Fan Coil Units?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top