Home›Products ›Swirl Diffusers ›DL-D Motorised Swirl Diffuser

DL-D Motorised Swirl Diffuser

DEZHOU DELENG AIR CONDITIONING · Motorised actuator, remote control

DL-D Motorised Swirl Diffuser

A built-in motorised actuator adjusts the blade angle remotely, giving automatic switching between the three seasons. Designed for tall spaces above 3.8 m — airports, stations, exhibition centres, stadiums and industrial plants. Full range from φ200 to φ630.

Motorised actuator
Remote control
Swirling supply
For tall spaces
Spun aluminium

DL-D motorised swirl diffuser

Product introduction

The DELENG DL-D motorised swirl diffuser is based on the adjustable swirl diffuser but with a built-in motorised actuator, so the blade angle no longer needs to be set by hand on site: it can be switched remotely from a building management system or a thermostat. It is designed for tall spaces with a floor-to-ceiling height above 3.8 m, and is widely used in airports, station waiting halls, exhibition centres, theatres, stadiums and industrial plants.

Adjustable blades and a diffuser ring sit on the face of the diffuser; the blades are designed on aerodynamic principles so that the air leaves as a vortex with a defined initial velocity, giving a long throw and wide coverage. The motorised actuator adjusts the blade angle remotely: in summer the cooling mode spreads cold air as a divergent swirl; in spring and autumn the fresh-air mode supplies fresh air over a large area; in winter the heating mode sends the warm jet vertically into the occupied zone.

The outer frame is spun from quality aluminium sheet, giving high strength and good appearance; the surface can be electrostatic powder coated to match the decor. It can be used with a volume control damper and a plenum box, in sizes from φ200 to φ630 in 8 steps.

Service hotline: 0534-2555668

Four key features

Motorised actuator

A built-in motorised actuator controls the blade angle remotely, so no manual adjustment at height is needed.

For tall spaces

Ceilings above 3.8 m: airports, stations, exhibition centres, stadiums, plants.

Swirling supply

Adjustable blades plus diffuser ring discharge a swirling jet at initial velocity, with long throw and wide coverage.

Spun aluminium

Spun from quality aluminium sheet: high strength, good appearance, electrostatic powder coating available.

Three-season supply modes (motorised switching)

Summer · cooling mode

The actuator sets the blades to the cooling angle; cold air leaves as a divergent swirl and sinks evenly without draughts.

Spring and autumn · fresh-air mode

Motorised setting to the normal-temperature angle so fresh air is supplied over a large area, diluting the room air with a high airflow rate.

Winter · heating mode

Motorised setting to the heating angle so the warm jet is concentrated vertically into the occupied zone instead of floating at the ceiling.

DL-D motorised swirl diffuser

DL-D motorised swirl diffuser size table

Unit mm · A outer diameter / B cut-out size / C duct connection

Model A outer dia (mm) B cut-out (mm) C duct (mm) H1(mm) H2(mm)
φ200 300 255 200 135 110
φ250 360 315 250 145 110
φ315 455 410 320 150 110
φ350 500 449 350 155 110
φ400 570 510 400 180 180
φ450 640 570 450 215 145
φ500 760 700 500 245 180
φ630 865 800 630 295 200
DL-D motorised swirl diffuser

DL-D motorised swirl diffuser technical performance

Cooling throw measured at a 45° supply angle; heating throw at a 75° supply angle

Model Airflow (m³/h) Pressure loss (Pa) Noise dB(A) Cooling throw (m)
Δt=-8℃
Heating throw (m)
Δt=+15℃
φ200 300 10 23 1.7 1.4
500 28 35 3.0 2.6
600 40 46 3.7 3.3
800 82 51 5.0 4.5
1000 99 56 6.0 5.3
φ250 300 10 23 1.7 1.4
500 28 35 3.0 2.6
600 40 46 3.7 3.3
800 82 51 5.0 4.5
1000 99 56 6.0 5.3
φ315 500 23 25 1.8 1.5
800 60 36 3.1 2.7
1100 100 45 3.5 3.1
1300 142 52 4.7 4.2
1600 205 57 6.0 5.3
φ350 500 23 25 1.8 1.5
800 60 36 3.1 2.7
1100 100 45 3.5 3.1
1300 142 52 4.7 4.2
1600 205 57 6.0 5.3
φ400 800 11 27 2.7 2.2
1200 25 38 3.8 3.2
1600 43 47 5.2 4.3
2000 68 53 6.5 5.3
2400 102 58 7.7 6.5
φ500 1200 12 28 2.1 1.7
1600 23 39 3.2 2.8
2000 29 45 3.6 3.2
3000 82 52 5.3 4.6
3500 96 58 6.2 5.5
φ630 1900 19 30 3.4 3.0
2600 33 40 4.2 3.8
3300 50 46 5.7 5.3
4000 86 55 6.9 6.4
4800 128 59 8.4 7.7
Notes:① Throw is measured where the terminal velocity reaches 0.5 m/s. ② Cooling throw is the value at a 45° supply angle. ③ Heating throw is the value at a 75° supply angle. ④ To change the throw distance, simply adjust the blade angle with the motorised actuator. For detailed data at other supply angles, please contact the DELENG technical department on +86 534 2555668.

Installation

DL-D motorised swirl diffuser

Can be installed together with a volume control damper or a plenum box, with suspended fixing; the motorised actuator provides a 24 V / 220 V control cable for connection to the building management system.

FAQ

Q: What is the difference between the motorised and the manual swirl diffuser?

A: The dimensions, airflow, pressure loss, noise and other performance data are exactly the same. The difference is the blade adjustment: the manual version has to be set by hand at height, while the motorised version has a built-in actuator that switches automatically between summer, spring/autumn and winter modes from a thermostat or building management system — ideal for high spaces where access for maintenance is difficult.

Q: How is the motorised actuator wired and controlled?

A: The actuator accepts 24 V or 220 V supply with on/off or analogue control. It can be connected to a BA building management system or controlled on site with a separate thermostat. Please state the supply voltage and control signal type when ordering.

Q: How do I select the size?

A: Select the model from the space volume and the required airflow, using the airflow – pressure loss – throw data in the table above. Send us the project drawings and DELENG technical staff will help with selection, tel. +86 534 2555668.

Product photos

DELENG factory photo · DL-D motorised swirl diffuser

DL-D motorised swirl diffuser
DL-D motorised swirl diffuser
DL-D motorised swirl diffuser
DL-D motorised swirl diffuser

Applications · motorised supply for tall spaces

A

Airport terminal

Remote motorised supply

S

Station waiting hall

Centralised control for large areas

E

Exhibition centre / stadium

Smart temperature control for venues

I

Industrial plant

Ventilation for tall workshops

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need DL-D Motorised Swirl Diffuser?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top