Cooling coils and heaters are built to drawing: copper tubes with aluminium fins, tested at 2.0 MPa, for AHUs, fan coil units, dryers and process cooling.

The DELENG sheet-metal assembly is built from quality galvanised sheet and pairs a pure copper tube cooling coil with a one-piece pressed condensate pan. Type A or B, covering models 34 to 238; easy to install and to replace.
This is the coil sheet-metal assembly Dezhou DELENG builds to fit fan coil units: a galvanised sheet frame that resists corrosion and lasts, a high-performance coil wound from quality copper tube for efficient heat transfer, and a one-piece pressed condensate pan that drains freely. It installs quickly and swaps out as a whole.
Service hotline: +86 534 2555668
Type A/B · galvanised sheet · copper tube · one-piece pan
Two size families, type A and type B, for different installation situations.
Quality galvanised sheet that resists corrosion and lasts.
A high-performance coil wound from quality copper tube for efficient heat exchange.
A one-piece pressed condensate pan that drains freely.
Type A / B available · unit: mm
| Model | Length (mm) | Height (mm) |
|---|---|---|
| 34 | 460 | 230 |
| 51 | 580 | |
| 68 | 650 | |
| 85 | 780 | |
| 102 | 900 | |
| 136 | 1100 | |
| 170 | 1360 | |
| 204 | 1560 | |
| 238 | 1760 |
Type A dimensions
| Model | Length (mm) | Height (mm) |
|---|---|---|
| 34 | 510 | 230 |
| 51 | 630 | |
| 68 | 700 | |
| 85 | 830 | |
| 102 | 950 | |
| 136 | 1150 | |
| 170 | 1410 | |
| 204 | 1610 | |
| 238 | 1810 |
Type B dimensions
Coil assembly for fan coil units
Whole assembly swaps out easily
Fits the full range of fan coil units
One-piece pan drains freely
A: Type A runs 460-1760 mm in length and type B 510-1810 mm, both 230 mm high. Type B is slightly longer overall; choose by the space available in the unit, the connection direction and the dimensions you are replacing.
A: It covers models 34 to 238, each with its own length (460 mm on model 34 up to 1760 mm on model 238). The sheet-metal assembly and coil can be replaced together without altering other parts of the unit.
A: A galvanised sheet frame, a copper tube cooling coil and a one-piece pressed condensate pan, all pre-assembled; fitting it back means only reconnecting the water and drain lines.
A: Length, hole positions and connection direction can be made to drawings. When installing, keep the condensate pan level so water does not stand, point the drain outlet down and make sure the flange faces seat to avoid air leakage.
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
