Home›Products ›Cooling Coils & Heaters ›DELENG Stainless Steel Cooling Coil (Custom-made)

DELENG Stainless Steel Cooling Coil (Custom-made)

DEZHOU DELENG · FACTORY DIRECT SUPPLY

DELENG Stainless Steel Cooling Coil (Custom-made)

A fully stainless steel coil that resists rust and corrosion. Width 500-2000 mm and height 300-1500 mm are customisable, fin pitch 2-5 mm, 4-12 tube rows, and heat transfer is 25% higher.

All stainless steelWidth 500-2000 mmFin pitch 2-5 mm4-12 rows≤1.6 MPa
DELENG stainless steel cooling coil, custom-made

Product introduction

The DELENG stainless steel cooling coil (custom-made) uses 304/316L stainless steel tubes, stainless steel fins and a stainless steel frame, so every part in contact with the medium is stainless. It resists rust, corrosion, high temperature and high pressure, and is designed for heat exchange and cooling in highly corrosive environments such as chemical plants, food and pharmaceutical works, seawater and exhaust gases.

Outline dimensions, rows (2/4/6/8), tube diameter and fin pitch, connection direction and material can all be customised to the project drawing. Dezhou DELENG is the manufacturer and supplies direct; selection for your duty is free of charge.

Service hotline: +86 534 2555668

Key features · stainless steel cooling coil

All-stainless anti-corrosion · High-efficiency heat exchange · Custom dimensions · Temperature and pressure resistant

A

All-stainless anti-corrosion

Fins, tubes and frame are all stainless steel, resisting rust and corrosion in damp and aggressive environments.

H

High-efficiency heat exchange

Stainless fins are mechanically expanded onto the tubes for tight contact, giving high efficiency and stable heating and cooling.

C

Custom dimensions

Dimensions, rows and circuiting are built to the project drawing, air volume and water flow, matching any air handling unit.

T

Temperature and pressure resistant

Thick tube walls withstand pressure and high or low temperatures, working hot or chilled without leaks in long service.

Coil rows · 2-row / 4-row / 6-row / 8-row

The more rows, the larger the heat transfer area and the higher the capacity — choose according to the project duty and the installation space

Cooling coil 2-row 4-row 6-row 8-row comparison

 

Cooling coil selection sheet · drawing and parameters required for ordering

Follow the sheet below and send the drawing dimensions and selection parameters — DELENG engineering will quote and schedule quickly

Product photos

DELENG stainless steel cooling coil photo 1DELENG stainless steel cooling coil photo 2DELENG stainless steel cooling coil photo 3DELENG stainless steel cooling coil photo 4

Applications · heat exchange in aggressive environments

Fully stainless construction · suited to many duties

C

Chemical plants

Corrosion-resistant heat exchange for chemical workshops

F

Food and pharma

Clean cooling for food production areas

S

Seawater systems

Chloride-resistant seawater cooling

E

Electronics

Constant temperature and humidity in clean rooms

FAQ

Q: What is the difference between a stainless steel coil and a standard coil?

A: A standard coil uses copper tubes with aluminium fins — efficient and lower cost, but not corrosion resistant. A stainless steel coil changes the tubes, fins and frame to 304/316L stainless steel, so it resists corrosion, high temperature and pressure; the trade-off is a higher price than the standard type.

Q: Which duties call for a stainless steel coil?

A: Aggressive gas or acid mist in chemical plants, clean and anti-corrosion demands in food and pharmaceutical works, seawater and salt-laden air, acidic exhaust from electronics plants, exhaust cooling and high-temperature drying — a stainless steel coil lasts longer in all of these.

Q: How do I choose the material and the number of rows?

A: Choose 304 or 316L according to the medium — 316L is recommended where chloride levels are high, such as seawater. Rows (2/4/6/8) follow the required capacity, air volume and permitted air resistance; tube diameter, fin pitch and connection direction are made to the drawing.

Q: Can the coil be customised, and what is needed to order?

A: Yes — dimensions, rows, material and connections can be customised from a drawing or from parameters. Send the air volume, entering and leaving dry-bulb / wet-bulb temperatures, medium type and concentration, heating or cooling water temperature and flow, permitted outline dimensions and connection direction, and we will issue a selection proposal.

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need Stainless Steel Cooling Coil?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top