Home›Products ›Swirl Diffusers ›Swirl Diffuser with Adjustable Nozzles

Swirl Diffuser with Adjustable Nozzles

DEZHOU DELENG AIR CONDITIONING · Direct from our factory

DL-XL Adjustable Swirl Diffuser

Circular swirling supply with adjustable blade angles: long throw and wide coverage, made for tall spaces above 3.8 m — airports, stations, exhibition centres, stadiums and industrial plants. Spun aluminium body, full range from φ200 to φ630.

Adjustable blades
Swirling supply
For tall spaces
Spun aluminium
φ200~φ630

DL-XL adjustable swirl diffuser

Product introduction

The DELENG DL-XL adjustable swirl diffuser is designed for tall spaces with a floor-to-ceiling height above 3.8 m, and is widely used in airports, station waiting halls, exhibition centres, theatres, stadiums and industrial plants. Adjustable blades and a diffuser ring sit on the face of the diffuser; the blades are designed on aerodynamic principles so that the air leaves as a vortex with a defined initial velocity, giving a long throw, wide coverage and stronger air mixing.

The blade angle can be set to suit the duty: in summer the cooling mode spreads cold air as a divergent swirl; in spring and autumn the normal-temperature mode replenishes fresh air over a large area; in winter the heating mode concentrates the warm jet vertically down into the occupied zone. Blade adjustment is available as manual, motorised or thermostatic automatic control.

The outer frame is spun from quality aluminium sheet, giving high strength and good appearance; the surface can be electrostatic powder coated to match the decor. It can be used together with a volume control damper and a plenum box, in sizes from φ200 to φ630 in 8 steps.

Service hotline: 0534-2555668

Four key features

For tall spaces

Ceilings above 3.8 m: airports, stations, exhibition centres, stadiums, plants.

Swirling supply

Adjustable blades plus diffuser ring discharge a swirling jet at initial velocity, with long throw and wide coverage.

Adjustable angle

Manual, motorised or thermostatic automatic control, with switching between the three seasons.

Spun aluminium

Spun from quality aluminium sheet: high strength, good appearance, electrostatic powder coating available.

Three-season supply modes

Summer · cooling mode

The blades are set to the cooling angle; cold air leaves as a divergent swirl, improving mixing so that cool air sinks evenly without draughts.

Spring and autumn · fresh-air mode

The blades are set to the normal-temperature angle so fresh air is supplied over a large area, diluting the room air with a high airflow rate.

Winter · heating mode

The blades are set to the heating angle so the warm jet is concentrated vertically down into the occupied zone instead of floating at the ceiling.

DL-XL adjustable swirl diffuser

DL-XL swirl diffuser size table

Unit mm · A outer diameter / B cut-out size / C duct connection

Model A outer dia (mm) B cut-out (mm) C duct (mm) H1(mm) H2(mm)
φ200 300 255 200 135 110
φ250 360 315 250 145 110
φ315 455 410 320 150 110
φ350 500 449 350 155 110
φ400 570 510 400 180 180
φ450 640 570 450 215 145
φ500 760 700 500 245 180
φ630 865 800 630 295 200
DL-XL adjustable swirl diffuser

DL-XL swirl diffuser technical performance

Cooling throw measured at a 15° supply angle; heating throw at a 75° supply angle

Model Airflow (m³/h) Pressure loss (Pa) Noise dB(A) Cooling throw (m)
Δt=-8℃
Heating throw (m)
Δt=+15℃
φ200 300 10 23 1.7 1.4
500 28 35 3.0 2.6
600 40 46 3.7 3.3
800 82 51 5.0 4.5
1000 99 56 6.0 5.3
φ250 300 10 23 1.7 1.4
500 28 35 3.0 2.6
600 40 46 3.7 3.3
800 82 51 5.0 4.5
1000 99 56 6.0 5.3
φ315 500 23 25 1.8 1.5
800 60 36 3.1 2.7
1100 100 45 3.5 3.1
1300 142 52 4.7 4.2
1600 205 57 6.0 5.3
φ350 500 23 25 1.8 1.5
800 60 36 3.1 2.7
1100 100 45 3.5 3.1
1300 142 52 4.7 4.2
1600 205 57 6.0 5.3
φ400 800 11 27 2.7 2.2
1200 25 38 3.8 3.2
1600 43 47 5.2 4.3
2000 68 53 6.5 5.3
2400 102 58 7.7 6.5
φ500 1200 12 28 2.1 1.7
1600 23 39 3.2 2.8
2000 29 45 3.6 3.2
3000 82 52 5.3 4.6
3500 96 58 6.2 5.5
φ630 1900 19 30 3.4 3.0
2600 33 40 4.2 3.8
3300 50 46 5.7 5.3
4000 86 55 6.9 6.4
4800 128 59 8.4 7.7
Notes:① Throw is measured where the terminal velocity reaches 0.5 m/s. ② Cooling throw is the value at a 15° supply angle. ③ Heating throw is the value at a 75° supply angle. ④ To change the throw distance, adjust the blade angle. For detailed data at other supply angles, please contact the DELENG technical department on +86 534 2555668.

Installation

DL-XL adjustable swirl diffuser

Can be installed together with a volume control damper or a plenum box, with suspended fixing.

FAQ

Q: What is the difference between a swirl diffuser and an ordinary diffuser?

A: An ordinary diffuser has a short throw and suits normal spaces below 3.8 m. A swirl diffuser discharges a rotating jet with a high induction ratio and rapid velocity decay, reaching throws of 6–8 m or more; it is made for tall spaces, so fewer diffusers are needed for the same area.

Q: Is the blade adjustment manual or motorised?

A: Three options are available: manual (set once on site), motorised (remote control) and thermostatic automatic (the angle follows the room temperature). Please state your requirement when ordering.

Q: How do I select the size?

A: Select the model from the space volume and the required airflow, using the airflow – pressure loss – throw data in the table above; the taller the space, the larger the size. Send us the project drawings and DELENG technical staff will help with selection, tel. +86 534 2555668.

Q: What material is it made of?

A: Spun from quality aluminium sheet with electrostatic powder coating: high strength, corrosion-resistant and durable, with colours customised on request.

Q: How is the price calculated?

A: Supplied direct from the factory. For a quotation please contact Manager Wei on +86 534 2555668.

Product photos

DL-XL adjustable swirl diffuser
DL-XL adjustable swirl diffuser
DL-XL adjustable swirl diffuser
DL-XL adjustable swirl diffuser

Applications · tall spaces

A

Airport terminal

Swirling supply in tall spaces

S

Station waiting hall

Even supply for large spaces

E

Exhibition centre / stadium

Ventilation and air conditioning for venues

I

Industrial plant

Ventilation for tall workshops

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a swirl Diffuser with Adjustable Nozzles?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top