Home›Products ›Centrifugal Fans ›Centrifugal Duct Fan

Centrifugal Duct Fan

Dezhou DeLENG · factory direct supply 

DeLENG GDF Centrifugal Duct Fan

Forward-curved multi-blade impeller, square inlet/outlet that connects straight to the duct, and an air-conditioning external rotor motor: low noise, smooth running and long service life.

Forward-curved multi-blade impellerSquare duct connectionLow noise, smooth runningStandard / acoustic versions
DeLENG GDF centrifugal duct fan

Product introduction

A duct fan, also called a duct ventilation fan, is selected on airflow, total pressure, efficiency, noise and motor power, and the duty is matched to the physical and chemical properties of the air being handled. The DeLENG GDF centrifugal duct fan uses a forward-curved multi-blade centrifugal impeller with single-side air intake; the fan is designed for horizontal inlet and outlet, and the square inlet and outlet can be connected directly to the duct. The motor is an air-conditioning external rotor motor, so the unit runs with low noise, smoothly and with a long service life.

By impeller diameter the fan comes in 16 sizes from 140 to 500 mm, with a series airflow of 130–5500 m³/h and total pressure of 45–470 Pa. By noise requirement there are two versions: the standard version (all parts made of lock-formed galvanised steel sheet) and the acoustic version (fan section of lock-formed galvanised steel, casing panels of colour-coated sheet with acoustic lining, aluminium profile frame and filters at the inlet and outlet). The impeller and casing are made of quality galvanised steel sheet, tooled and lock-formed; the impeller is statically and dynamically balanced to a balance accuracy of G5.6 or better.

It is widely used for ventilation and air exchange in hotels, restaurants, meeting rooms, office buildings, public restrooms and shopping malls. Working conditions: ambient temperature -20 to +40°C, humidity below 90%, air medium (dust content not more than 100 mg/m³), power supply three-phase 380 V 50 Hz or single-phase 220 V 50 Hz (some models).

Service hotline: +86 534 2555668

Key features · why choose the DeLENG GDF centrifugal duct fan

Forward-curved multi-blade impeller · square duct connection · low noise, smooth running · standard / acoustic versions

F

Forward-curved multi-blade impeller

A forward-curved multi-blade centrifugal impeller with single-side intake, statically and dynamically balanced to G5.6 for good aerodynamic performance.

S

Square duct connection

Square inlet and outlet in a horizontal arrangement connect straight to the duct, removing the need for reducers and simplifying installation.

L

Low noise, smooth running

An air-conditioning external rotor motor keeps unit noise low, running smooth and service life long.

D

Dual versions: standard and acoustic

The standard version uses lock-formed galvanised steel; the acoustic version adds acoustic lining, an aluminium frame and inlet/outlet filters.

Product details

Quality details you can see — built for your satisfaction

Rugged impeller

Rugged impeller

Blades are cold-rolled steel formed so they will not come loose, with strict dynamic balancing for good aerodynamics.

Thickened casing

Thickened casing

The thickened casing is pressed in one piece, making full use of aerodynamics for high efficiency, high pressure and high airflow.

Pure copper motor

Pure copper motor

Full copper windings for stronger power, with thermal protection, heat resistance and corrosion resistance.

GDF centrifugal duct fan performance parameters

20 sizes · 3 duty points for each size

Model Speed (r/min) Airflow (m³/h) Total pressure (Pa) Static pressure (Pa) Motor model Power (kW) Noise dB(A) Weight (kg)
GDF1.4-8 720 130 45 38 YDK-3-8 0.003 38 12
GDF1.4-4 1220 180 91 77 YDK-19-4 0.019 44 12
GDF2.5-8 690 600 80 65 YDK-40-8 0.04 46 27
550 90 78
450 100 92
GDF2.5-6 900 800 105 78 YDK-90-6 0.09 53 29
720 128 106
560 142 129
GDF2.5-4 1380 1200 225 164 YDK-250-4 0.25 61 30
1000 300 258
860 330 299
GDF3.0-8 690 1260 100 67 YDK-90-8 0.09 52 32
1000 138 118
800 156 143
GDF3.0-6 900 1640 158 102 YDK-180-6 0.18 58 32
1300 220 185
1060 246 223
GDF3.0-4 1380 2510 370 238 YDK-750-4 0.75 68 35
2000 515 432
1620 578 523
GDF3.5-10 550 1550 85 58 YDK-120-10 0.12 52 45
1240 112 95
900 128 119
GDF3.5-8 690 1993 126 81 YDK-250-8 0.25 57 48
1588 196 148
1286 197 179
GDF3.5-6 900 2599 214 138 YDK-450-6 0.45 60 50
2071 298 250
1678 335 304
GDF4.0-10 550 2300 130 95 YDK-180-10 0.18 56 60
2000 175 148
1780 190 169
GDF4.0-8 690 2700 210 161 YDK-370-8 0.37 61 62
2400 260 222
2120 285 255
GDF4.0-6 900 3600 373 286 YDK-900-6 0.9 68 64
3200 462 393
2800 500 448
GDF4.5-10 550 3200 185 145 YDK-370-10 0.37 60 75
3000 220 185
2750 250 221
GDF4.5-8 690 4000 300 237 YDML1.8-8 0.8 66 80
3760 340 285
3500 380 332
GDF4.5-6 900 5300 510 400 YDK-1800-6 1.8 73 86
5000 600 502
4660 650 565
GDF5.0-10 550 4500 220 171 YDK-650-10 0.65 63 87
4000 280 241
3650 310 278
GDF5.0-8 690 5460 350 278 YDK-1800-8 1.8 70 102
5000 430 369
4560 470 420
GDF5.0-6 990 7280 600 471 YDWL3-6 3.0 76 115
6700 740 631
6080 810 720

Airflow and pressure depend on the final selection; other sizes can be customised.

Dimensions and installation drawing

Unit: mm

Dimensions and installation drawing
Model Fan connection A×B Fan length L Fan length B1 Fan width A1
2.5 400*250 400 310 460
2.8 430*250 430 310 490
3.0 460*320 450 380 520
3.5 500*320 500 380 560
4.0 550*320 540 380 610
4.5 600*400 600 460 660
5.0 650*400 650 460 710

Fan dimensions are standard factory stock sizes; minor changes may be made without notice.

Product photos

Painted finished units and unpainted galvanised bodies · custom painting available

Painted finished unit

Painted finished unit
Impeller visible from the inlet side

Impeller visible from the inlet side
Angled view, motor wiring

Angled view, motor wiring
Unpainted galvanised body, top view

Unpainted galvanised body, top view
Galvanised flange, internal airflow guide

Galvanised flange, internal airflow guide

Applications

GDF centrifugal duct fan · ventilation and air exchange in many premises

H

Hotels and restaurants

Ventilation and air exchange in hotels and restaurants

O

Offices and meeting rooms

Ventilation for meeting rooms and office buildings

M

Malls and public restrooms

Air exhaust in shopping malls and public restrooms

D

Direct duct connection

Square inlet and outlet connected straight to the duct

FAQ

Q: What sizes does the GDF centrifugal duct fan come in?

A: By impeller diameter the fan covers 16 sizes from 140 to 500 mm, with a series airflow of 130–5500 m³/h and total pressure of 45–470 Pa. Selection is based on the airflow and pressure required by the system.

Q: What is the difference between the standard and acoustic versions?

A: The standard version is made entirely of lock-formed galvanised steel sheet. In the acoustic version the fan section is lock-formed galvanised steel, the casing panels are colour-coated sheet with acoustic lining, the frame is aluminium profile, and filters are fitted at the inlet and outlet, so noise is lower.

Q: How are the inlet and outlet connected?

A: The fan is designed for horizontal inlet and outlet, and the square openings connect directly to the duct without extra reducers, simplifying installation and saving time.

Q: What working conditions does it suit?

A: Ambient temperature -20 to +40°C, humidity below 90%, air medium (dust content not more than 100 mg/m³), power supply three-phase 380 V 50 Hz or single-phase 220 V 50 Hz (some models).

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a centrifugal Duct Fan?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top