Home›Products ›Exposed Vertical FCU ›Upward-discharge Exposed Vertical Fan Coil Unit

Upward-discharge Exposed Vertical Fan Coil Unit

DELENG HVAC · Direct from our Dezhou factory  

Upward-discharge Exposed Vertical Fan Coil Unit

Floor-standing with no ceiling void needed: vertical upward air discharge and a European-style electrostatic powder-coated finish, ideal for renovation projects in already decorated buildings.

Vertical upward airflowFloor-standing, no ceilingEuropean look, powder-coatedFirst choice for renovation
Upward-discharge exposed vertical fan coil unit

Product introduction

The DeLENG upward-discharge exposed vertical fan coil unit brings a new level of comfort indoors, thanks to its distinctive upward air discharge and refined appearance. The upward airflow pattern distributes conditioned air evenly throughout the room. The casing is finished with electrostatic powder coating in an elegant colour that blends into modern interior decoration.

The unit sits directly on the floor without complex installation work, saving space and simplifying routine maintenance. Its European-inspired casing is powder-coated for corrosion resistance, and a condensate drip tray is built in at the bottom. Ready to run once installed, it is the preferred air conditioning terminal for old-building renovation and already decorated spaces.

Service hotline:0534-2555668

Key features · Why choose the upward-discharge exposed vertical fan coil unit

Vertical upward airflow · Floor-standing, no ceiling · Powder-coated finish · Easy service

V

Vertical upward airflow

Upward air discharge distributes air evenly through the room for better indoor comfort.

F

Floor-standing, no ceiling

Installed straight on the floor against a wall corner, with no ceiling void required. Ready to run, it suits already decorated spaces.

P

Powder-coated finish

A European-style look with a corrosion-resistant powder-coated casing in an elegant colour that matches the interior.

E

Easy service

Modular design for simple disassembly and assembly, with a built-in bottom drip tray for easy cleaning and maintenance.

Upward-discharge exposed vertical fan coil unit technical data

FP-LM European series · full model range FP-34 to FP-238

1. Performance data

Performance Model FP-34 FP-51 FP-68 FP-85 FP-102 FP-136 FP-170 FP-204 FP-238
Airflow m³/h High 340 510 680 850 1020 1360 1700 2040 2380
Medium 255 383 510 638 765 1020 1275 1530 1785
Low 170 255 340 425 510 680 850 1020 1190
Cooling capacity W High 1800 2700 3600 4500 5400 7200 9000 10800 12600
Medium 1440 2160 2880 3600 4320 5760 7200 8640 10080
Low 1170 1755 2340 2925 3510 4680 5850 7020 8190
Heating capacity W High 2700 4050 5400 6750 8100 10800 13500 16200 18900
Medium 2160 3240 4320 5400 6480 8640 10800 12960 15120
Low 1755 2633 3510 4388 5265 7020 8775 10530 12285
Input power W 12Pa 37 52 62 76 96 134 152 189 228
30Pa 44 59 72 87 108 156 174 212 253
50Pa 49 66 84 100 118 174 210 250 300
Noise dB(A) 12Pa 37 39 41 43 45 46 48 50 52
30Pa 40 42 44 46 47 48 50 52 54
50Pa 42 44 46 47 49 50 52 54 56
Water flow t/h 0.39 0.55 0.70 0.82 0.91 1.34 1.59 1.80 2.07
Water resistance kPa 12 16 20 23 26 28 32 38 42
Weight kg (FP-LM) 24 28 30 31 34 48 53 56 66
Water connections: DN20 female thread
Condensate drain: DN20 male thread
Power supply: Single phase 220V / 50Hz

Dimensional drawing

Dimensional drawing

2. Overall dimensions (mm)

Model A
Body length mm
B
Body thickness mm
Total
height mm
Unit
thickness mm
FP-34LM 790 470 670 235
FP-51LM 940 620 670 235
FP-68LM 980 660 670 235
FP-85LM 1100 780 670 235
FP-102LM 1250 930 670 235
FP-136LM 1450 1150 670 235
FP-170LM 1680 1360 670 235
FP-204LM 1880 1560 670 235
FP-238LM 2080 1760 670 235

Dimensions: total unit height 670 mm, unit thickness 235 mm. Water connections and the condensate drain are at the rear of the unit; the filter can be pulled out from the front for cleaning, and the fan speed switch sits on the side of the bottom outlet grille.

Selection / quotation / technical support: 0534-2555668 (DeLENG technical department)

Applications · heating and cooling where ceilings are not available

R

Renovation

Surface pipework, no ceiling void

O

Offices

Floor-standing, ready to run

C

Classrooms

Upward airflow, even and comfortable

W

Wards and laboratories

Quiet operation, easy maintenance

FAQ

Q: What does an exposed vertical fan coil unit cost?

A: Pricing depends on model and configuration. The FP-LM series is supplied direct from our Dezhou factory without middlemen, so please call 0534-2555668 for a quotation.

Q: Does an exposed vertical unit perform the same as a concealed horizontal one?

A: Heat exchange efficiency is identical; the difference is installation only. An exposed vertical unit needs no ceiling void and uses surface pipework, which suits renovation work, while a concealed horizontal unit is hidden in the ceiling for a neater look but requires coordination with the fit-out.

Q: Is it suitable to place the unit beside a window?

A: Very suitable. Installed under a window or in an exterior-wall corner, the conditioned air directly blocks heat or cold penetrating from outside, which improves comfort.

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a upward-discharge Exposed Vertical Fan Coil Unit?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top