Heat recovery ventilators supply fresh air while recovering energy from the exhaust stream through a total heat exchange core, with multi-stage filtration options for hospitals, offices and schools.

DeLENG single-flow quiet fresh-air unit works on “forced extract, natural supply”: indoor negative pressure draws fresh air in through bedroom and living-room inlets, the air then travels through corridors and door gaps to the kitchen and bathroom and is discharged, renewing the whole home without extra ductwork.
Three filter configurations are available: standard (basic supply and extract), primary filtration (G4 panel filter trapping hair, pollen and coarse dust) and full purification (G4 + coconut-shell activated carbon + HEPA H11, removing PM2.5, formaldehyde, TVOC and decoration odour).
The fan housing contains sound-absorbing foam and a damping layer, and the outlet is fitted with an ABS flexible connector, so operating noise is as low as 35 dB(A). The external-rotor low-noise motor is efficient and long-lived, rated for 24-hour continuous running. A service hatch at the bottom of the housing lets the filter be pulled out for cleaning or replacement.
Service hotline: +86 534 2555668
Three-stage filtration · High airflow · 38 dB · Metal volute
Primary + coconut-shell carbon + HEPA, removal rate 95.2%.
CADR > 500 m³/h, airflow 300–3000 m³/h.
Library-quiet operation, 0.5 kWh of electricity per day.
One-piece pressed galvanised steel, high static pressure for long duct runs.




| Model | Airflow (m³/h) | External static pressure (Pa) | Power (W) | Voltage (V) | Overall size L×W×H (mm) |
|---|---|---|---|---|---|
| DXFJ-03 | 350 | 60 | 60 | 220 | 450×385×220 |
| DXFJ-05 | 500 | 80 | 90 | 220 | 450×385×220 |
| DXFJ-08 | 800 | 100 | 110 | 220 | 560×430×285 |
| DXFJ-10 | 1000 | 110 | 120 | 220 | 560×430×285 |
| DXFJ-12 | 1200 | 120 | 150 | 220 | 560×430×285 |
| DXFJ-15 | 1500 | 150 | 200 | 220 | 570×450×380 |
| DXFJ-20 | 2000 | 200 | 200 | 220 | 570×450×380 |
| DXFJ-25 | 2500 | 320 | 300 | 380 | 600×550×450 |
| DXFJ-30 | 3000 | 550 | 300 | 380 | 600×550×450 |
Note: figures are for the full-purification version (primary + activated carbon + HEPA); the standard and primary-filtration versions share the same dimensions.
38 dB quiet air renewal
High airflow, efficient purification
0.5 kWh per day, energy saving
Three-stage filtration protects breathing
Q: How loud is it? Will it disturb sleep when fitted in a bedroom ceiling?
A: Overall noise is as low as 35 dB(A); the high-efficiency purification version measures about 38 dB(A). Sound-absorbing foam and a damping layer sit inside the fan housing and the outlet has an ABS flexible connector, while the external-rotor low-noise centrifugal fan runs 24 hours continuously — installation in a bedroom ceiling does not disturb sleep.
Q: Which version should I choose — standard, primary filtration or full purification?
A: Standard only supplies and extracts air. The primary-filtration version (G4 panel filter) traps hair, pollen and coarse dust. Full purification is G4 + coconut-shell activated carbon + HEPA H11, removing PM2.5, formaldehyde, TVOC and decoration odour.
Q: How are the filters maintained, and how often are they replaced?
A: A service hatch at the bottom of the housing lets the filter be pulled out for cleaning or replacement. The G4 primary filter is washed every 3–6 months (water-washable), activated carbon every 6–12 months and HEPA H11 about once a year, adjusted to outdoor dust levels and running hours.
Q: How do I select a model — airflow, power and size?
A: Size airflow by room volume and occupancy: 350–500 m³/h (DXFJ-03/05, 60–90 W) suits a single room or small apartment; 800–1200 m³/h (DXFJ-08/10/12, 110–150 W) suits larger homes; 1500–3000 m³/h (DXFJ-15 to DXFJ-30) suits whole-house or commercial projects. Send the project parameters and we will confirm the model.
Selection and quotation: +86 534 2555668 | WeChat +86 534 2555668 | sales@deleng.com
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
