Home›Products ›Heat Recovery Ventilators ›Dual-flow Quiet Fresh-air Heat Recovery Unit
DeLENG · factory direct supply

Dual-flow Quiet Fresh-air Heat Recovery Unit

Heat recovery ventilators supply filtered fresh air while recovering 60-80% of the energy from the extract air, keeping rooms ventilated without losing heating or cooling.

Dual-flow Quiet Fresh-air Heat Recovery Unit

Dual-flow Quiet Fresh-air Heat Recovery Unit

DeLENG dual-flow quiet fresh-air ventilator uses a “supply and extract in sync” design: one unit discharges stale indoor air while bringing fresh outdoor air in, so the two airflows stay balanced and the room never sits under negative or positive pressure. Inside are copper motors and multi-blade centrifugal impellers; the housing is galvanised steel lined with insulation and acoustic material, giving durability, good sound isolation and no condensation.

Three configurations are offered: standard (basic supply and extract), primary filtration (a G4 primary filter on the supply side, trapping hair, pollen and coarse dust) and full purification (G4 primary + activated carbon + HEPA H11, removing PM2.5, formaldehyde, TVOC and odour). Purification efficiency reaches 99.97% in a single pass.

Airflow covers 350–3000 m³/h across nine models, with a body as thin as 220 mm for ceiling installation.

Service hotline: +86 534 2555668

Key features · Dual-flow Quiet Fresh-air Heat Recovery Unit

Metal housing · Powerful airflow · High-efficiency filtration · Low noise

M

Metal housing

One-piece formed galvanised steel: rigid, corrosion-resistant and well sound-isolated.

P

Powerful airflow

Copper motor with volute fan: high airflow, high static pressure, long duct runs.

H

High-efficiency filtration

Imported filter media, 99.97% single-pass efficiency, intercepts PM2.5.

L

Low noise

Acoustic lining and damping design; running sound stays gentle and does not disturb sleep.

Core selling points

Filter stage

Housing detail

Airflow design

DL-SL Series · Dual-flow Quiet Fresh-air Heat Recovery Unit — Performance Data

Model Airflow (m³/h) External static pressure (Pa) Power (W) Voltage (V) Connection diameter Overall size L×W×H (mm)
DL-SL-350 350 60 120 220 φ150 450×600×220
DL-SL-500 500 90 160 220 φ150 450×600×220
DL-SL-800 800 110 200 220 φ200 530×800×285
DL-SL-1000 1000 120 220 220 φ200 530×800×285
DL-SL-1200 1200 150 240 220 φ200 550×850×300
DL-SL-1500 1500 200 300 220 φ200 550×900×380
DL-SL-2000 2000 200 500 220 φ200 550×900×380
DL-SL-2500 2500 300 640 220 φ200 550×1200×450
DL-SL-3000 3000 300 550 380 φ200 550×1200×450

Note: figures are for the standard version; the purification version adds a primary + activated carbon + HEPA filter section but keeps the same dimensions. Airflows above 4000 m³/h can be customised. Selection: +86 534 2555668.

Outline dimensions

Dual-flow quiet fresh-air ventilator outline dimensions

Note: overall size (L×W×H) is listed in the performance table above; dimensions vary slightly by model.

Product display

Pull-out filter · three-stage filtration

Side view · service hatch

Top view · inlet and outlet

Structure callouts

Applications · Dual-flow fresh-air purification

C

Commercial spaces

Ventilation for malls, shops and offices

H

Hotel rooms

Quiet air renewal that does not disturb sleep

H

Homes

Whole-house fresh-air exchange for the family

S

Schools and hospitals

Large-space air circulation with clean air

FAQ

Q: What is the difference between dual-flow and single-flow ventilators?
A: Dual-flow supplies fresh air and extracts stale air at the same time, keeping the airflow balanced. Single-flow only forces extract and relies on natural supply. Dual-flow suits spaces with higher air-quality requirements.

Q: Are the purification and standard versions the same size?
A: Yes. Dimensions are identical: the purification version adds a filter section, and the installation dimensions are interchangeable with the standard version.

Q: Can it be customised to non-standard requirements?
A: Yes. DeLENG is a source factory in Dezhou and builds to project drawings: dimensions, materials and duct connection directions can be specified. Call +86 534 2555668.

Selection and quotation: +86 534 2555668  |  WeChat +86 534 2555668  |  sales@deleng.com

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a dual-flow Quiet Fresh-air Heat Recovery Unit?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top