Home›Products ›Axial Fans ›Axial Flow Fan

Axial Flow Fan

Dezhou DeLENG · factory direct supply 

T35 Axial Flow Fan

The DeLENG T35 low-noise axial flow fan comes in 18 sizes from 2.8 to 11.2, with a 4-blade impeller and blade angles of 15°/20°/25°/35°. Airflow 560–67,000 m³/h and total pressure 10–470 Pa. Wall-mounted, workstation or duct installation, in standard, anti-corrosion (FRP) or explosion-proof (Exd II BT4) versions — widely used for ventilation and heat exchange in factories, warehouses, offices and homes.

18 sizes 2.8–11.2Airflow 560–67,000 m³/hTotal pressure 10–470 PaWall / workstation / ductStandard / FRP / Ex-proof
T35 axial flow fan

Product introduction

The DeLENG T35 low-noise axial flow fan is mainly used for ventilation and air exchange in general factories, warehouses, homes and offices, and for improving heat dissipation from radiators. It is made in sizes 2.8# to 11.2# — 18 models in total, with impeller diameters from 280 mm to 1120 mm. Each impeller has 4 blades, the blade angle can be set to 15°, 20°, 25° or 35°, airflow ranges from 560 to 67,000 m³/h and total pressure from 10 to 470 Pa. The fan can be wall-mounted or installed inside a duct.

By casing form the series covers wall type, workstation type and duct type. By working environment it covers the standard type (non-corrosive, non-flammable and non-explosive gases), the anti-corrosion type (FRP casing for corrosive gases without dust) and the explosion-proof type (Exd II BT4, for gases containing flammable and explosive components). All three share the same aerodynamic design, so the duty of a given size, speed and blade angle is the same in every version.

The design is based on similar imported axial fans, with the blade profile and cylindrical hub optimised and the matching motor redesigned — so efficiency is higher and the A-weighted noise level is about 3.6 dB lower than the earlier generation. The blade root and casing are reinforced, which keeps vibration low and the unit stable in long-term duty.

Selection and technical support: +86 534 2555668

Key advantages of the T35 axial flow fan

High airflow · multiple sizes · three mounting options · FRP and explosion-proof options

H

High airflow

A large swept impeller with an optimised blade profile moves up to 67,000 m³/h — direct exhaust for workshops, warehouses and long ducts.

M

Multiple sizes

18 sizes from 2.8# to 11.2# with four blade angles (15°/20°/25°/35°), so airflow and pressure can be matched closely to the duty.

T

Three mounting options

Wall-mounted, workstation or duct installation, with matching flanges, guard meshes and louvre grilles available.

F

FRP and explosion-proof options

FRP anti-corrosion casings for corrosive gases and Exd II BT4 explosion-proof motors for flammable and explosive gas environments.

Product details

Quality details you can see — built to last

Thickened cast-iron blades

Thickened cast-iron blades

Cast-iron blades with a reinforced root, balanced as a set, keep the impeller rigid and quiet at high speed.

Thickened cast-iron casing

Thickened cast-iron casing

A thick cast-iron casing around the impeller resists deformation and corrosion and holds the air path steady.

100% copper motor

100% copper motor

Pure copper windings, IP54 protection; explosion-proof Exd II BT4 motors are available for hazardous gas areas.

Front and rear guard meshes

Front and rear guard meshes

Metal guard meshes on both the inlet and the outlet side, so fingers and foreign objects cannot reach the blades.

T35-11 axial flow fan performance parameters

Complete factory performance data · size, speed, blade angle and motor selection

No.
(No.)
Speed
(r/min)
Blade angle
(°)
Airflow
(m³/h)
Total pressure
(Pa)
Efficiency
(%)
Theoretical power
(kW)
Shaft power
(kW)
Motor model Power
(kW)
Noise
dB(A)
Weight
(kg)
2.8 2900 15 1649 152 0.87 0.08 0.092 YSF562-2 0.12 70 15
20 2167 169 0.88 0.115 0.133 YSF563-2 0.18 72 15
25 2685 174 0.895 0.145 0.166 YSF563-2 0.18 73 15
30 2921 186 0.88 0.171 0.179 YSF563-2 0.18 74 15
35 3202 232 0.86 0.24 0.276 YSF632-2 0.25 75 17
1450 15 826 38 0.87 0.01 0.012 YSF501-4 0.025 55 14
20 1086 43 0.88 0.015 0.017 YSF501-4 0.025 57 14
25 1346 44 0.895 0.018 0.021 YSF501-4 0.025 59 14
30 1464 48 0.88 0.022 0.026 YSF502-4 0.04 60 14
35 1605 60 0.86 0.031 0.036 YSF502-4 0.04 62 14
3.15 2900 15 2339 192 0.87 0.144 0.166 YSF563-2 0.18 74 17
20 3070 214 0.88 0.207 0.238 YSF632-2 0.25 76 19
25 3810 220 0.895 0.259 0.296 YSF711-2 0.37 77 20
30 4141 237 0.88 0.309 0.355 YSF711-2 0.37 78 20
35 4545 294 0.86 0.43 0.495 YSF712-2 0.55 79 22
1450 15 1169 48 0.87 0.018 0.02 YSF501-4 0.025 59 16
20 1537 53 0.88 0.026 0.03 YSF502-4 0.04 61 16
25 1905 55 0.895 0.032 0.037 YSF502-4 0.04 62 16
30 2027 59 0.88 0.039 0.045 YSF561-4 0.06 63 17
35 2273 74 0.86 0.053 0.06 YSF562-4 0.09 65 17
3.55 2900 15 3367 241 0.87 0.261 0.3 YSF711-2 0.37 76 23
20 4426 272 0.88 0.379 0.463 YSF712-2 0.55 79 26
25 5484 279 0.895 0.473 0.544 YSF712-2 0.55 80 26
30 5965 300 0.88 0.564 0.64 YSF801-2 0.75 81 29
35 6542 373 0.86 0.787 0.905 YSF802-2 1.1 82 29
1450 15 1680 61 0.87 0.033 0.038 YSF502-4 0.04 61 20
20 2208 68 0.88 0.047 0.054 YSF561-4 0.06 63 21
25 2737 70 0.895 0.059 0.068 YSF562-4 0.09 65 21
30 2977 75 0.88 0.07 0.081 YSF562-4 0.09 66 21
35 3265 93 0.86 0.098 0.113 YSF631-4 0.12 68 22
4 2900 15 4806 310 0.87 0.475 0.564 YSF712-2 0.55 79 30
20 6316 345 0.88 0.688 0.791 YSF802-2 1.1 80 33
25 7826 354 0.895 0.859 0.988 YSF802-2 1.1 83 33
30 8513 380 0.88 1.021 1.175 YSF802-2 1.1 84 33
35 9336 474 0.86 1.427 1.641 YSF90S-2 1.5 85 38
1450 15 2406 77 0.87 0.059 0.066 YSF562-4 0.09 65 25
20 3163 86 0.88 0.086 0.099 YSF631-4 0.12 67 26
25 3920 88 0.895 0.107 0.123 YSF631-4 0.12 68 26
30 4263 95 0.88 0.128 0.147 YSF632-4 0.18 69 27
35 4678 119 0.86 0.179 0.206 YSF711-4 0.25 70 28
4.5 1450 15 3427 98 0.87 0.107 0.123 YSF631-4 0.12 68 28
20 4504 110 0.88 0.156 0.179 YSF632-4 0.18 70 29
25 5881 113 0.895 0.159 0.224 YSF711-4 0.25 71 30
30 6070 121 0.88 0.231 0.266 YSF712-4 0.37 72 31
35 6658 150 0.86 0.322 0.37 YSF712-4 0.37 73 31
5 1450 15 4700 122 0.87 0.182 0.21 YSF711-4 0.25 71 38
20 6178 135 0.88 0.264 0.308 YSF712-4 0.37 73 39
25 7655 138 0.895 0.328 0.37 YSF712-4 0.37 74 39
30 8327 149 0.88 0.392 0.45 YSF801-4 0.55 75 41
35 9133 185 0.86 0.546 0.628 YSF802-4 0.75 76 44
960 15 3142 53 0.87 0.053 0.061 YSF801-6 0.37 62 42
20 4129 59 0.88 0.079 0.088 YSF801-6 0.37 64 42
25 5117 61 0.895 0.096 0.111 YSF801-6 0.37 65 42
30 5566 65 0.88 0.114 0.131 YSF801-6 0.37 66 42
35 6104 81 0.86 0.16 0.184 YSF801-6 0.37 68 42
5.6 1450 15 6595 151 0.87 0.318 0.365 YSF712-4 0.37 73 50
20 8667 169 0.88 0.461 0.53 YSF801-4 0.55 75 52
25 10379 174 0.895 0.578 0.665 YSF802-4 0.75 77 55
30 11682 186 0.88 0.687 0.71 YSF90S-4 1.1 77 59
35 12812 232 0.86 0.961 1.1 YSF90S-4 1.1 79 59
960 15 4362 67 0.87 0.093 0.106 YSF801-6 0.37 64 53
20 5370 74 0.88 0.133 0.153 YSF801-6 0.37 66 53
25 7101 76 0.895 0.166 0.191 YSF801-6 0.37 67 53
30 7724 81 0.88 0.198 0.228 YSF801-6 0.37 69 53
35 8471 101 0.86 0.276 0.318 YSF801-6 0.37 71 53
6.3 1450 15 9393 192 0.87 0.576 0.662 YSF802-4 0.75 77 71
20 12345 214 0.88 0.833 0.958 YSF90S-4 1.1 79 75
25 15297 220 0.895 1.043 1.199 YSF90L-4 1.5 80 78
30 16639 236 0.88 1.241 1.428 YSF90L-4 1.5 81 78
35 18250 294 0.86 1.734 1.994 YSF100L1-4 2.2 82 92
960 15 6219 84 0.87 0.167 0.192 YSF801-6 0.37 68 69
20 8173 94 0.88 0.243 0.249 YSF801-6 0.37 70 69
25 10128 96 0.895 0.361 0.347 YSF801-6 0.37 71 69
30 11016 104 0.88 0.365 0.415 YSF90S-6 0.75 72 75
35 12082 128 0.86 0.501 0.576 YSF90S-6 0.75 74 75
7.1 1450 15 13444 244 0.87 1.048 1.205 YSF90L-4 1.5 80 88
20 17670 272 0.88 1.515 1.742 YSF100L1-4 2.2 81 102
25 21895 279 0.895 1.892 2.176 YSF100L1-4 2.2 82 102
30 23815 300 0.88 2.255 2.593 YSF100L2-4 3 83 106
35 26120 373 0.86 3.143 3.614 YSF112M-4 4 84 111
960 15 8902 108 0.87 0.307 0.353 YSF90S-6 0.75 72 85
20 11700 120 0.88 0.422 0.508 YSF90S-6 0.75 74 85
25 14498 123 0.895 0.551 0.633 YSF90S-6 0.75 75 85
30 15766 133 0.88 0.654 0.752 YSF90S-6 0.75 76 85
35 17296 164 0.86 0.915 1.052 YSF90L-6 1.1 78 88
8 1450 15 19235 310 0.87 1.903 2.188 YSF100L1-6 2.2 82 125
20 25280 345 0.88 2.754 3.167 YSF112M-4 4 83 134
25 31325 354 0.895 3.441 3.957 YSF112M-4 4 84 134
30 34073 380 0.88 4.091 4.705 YSF132S-4 5.5 85 159
35 37070 474 0.86 5.716 6.753 YSF132M-4 7.5 86 172
960 15 12733 136 0.87 0.554 0.637 YSF90S-4 0.75 74 108
20 16733 151 0.88 0.798 0.918 YSF90L-6 1.1 76 111
25 20735 155 0.895 0.999 1.149 YSF100L-6 1.5 78 124
30 22556 167 0.88 1.187 1.365 YSF10L-6 1.5 78 124
35 24739 208 0.86 1.661 1.91 YSF112M-6 2.2 79 125
9 960 15 18132 172 0.87 0.99 1.139 YSF100L-6 1.5 78 155
20 23830 191 0.88 1.428 1.654 YSF112M-6 2.2 79 167
25 29529 196 0.895 1.797 2.067 YSF132S-6 3 80 185
30 32119 211 0.88 2.137 2.548 YSF132S-6 3 81 185
35 35227 263 0.86 2.99 3.439 YSF132M1-6 4 82 195
10 960 15 24874 213 0.87 1.609 1.944 YSF112M-6 2.2 79 197
20 32691 236 0.88 2.438 2.804 YSF132S-6 3 80 211
25 40508 242 0.895 3.044 3.501 YSF132M1-6 4 81 225
30 44062 261 0.88 3.627 4.171 YSF132M1-6 4 82 225
35 48326 234 0.86 5.065 5.825 YSF160M-6 7.5 83 273
11.2 960 15 34944 267 0.87 2.975 3.421 YSF132M1-6 4 83 265
20 45927 297 0.88 4.307 4.953 YSF132M2-6 5.5 84 276
25 56909 304 0.895 5.368 6.173 YSF160M-6 7.5 85 313
30 61091 337 0.88 6.571 7.557 YSF160M-6 7.5 86 313
35 67892 407 0.86 8.922 10.26 YSF160L-6 11 88 338
Selection notes: the data above are standard factory performance values for the T35-11 series. When ordering, please state: (1) size and speed; (2) blade angle (15°/20°/25°/35°); (3) mounting form (wall / workstation / duct); (4) working environment (standard / FRP anti-corrosion / explosion-proof Exd II BT4); (5) whether a silencer, vibration isolators, control box, guard mesh, matching flange or louvre grille is required. Small motors can be supplied for single-phase 220 V — please specify when ordering. DeLENG gives free selection support: +86 534 2555668.

T35 axial flow fan outline and installation dimensions

T35 axial fan Standard type (side view) outline dimensions
Standard type (side view)
T35 axial fan Standard type (front view) outline dimensions
Standard type (front view)
T35 axial fan Wall-mounted outline dimensions
Wall-mounted
T35 axial fan Duct installation outline dimensions
Duct installation

Fig.: outline and installation dimensions of the four mounting versions (unit: mm)

Dimension table (unit: mm)

Model Fan dia. D Outer dia. D1 Fan height D2 Length L1
2.2 220 270 300 250
2.55 255 305 340 250
2.8 280 330 360 250
3.15 312 365 390 250
3.55 355 415 460 250
4.0 400 460 500 330
4.5 450 510 550 330
5.0 500 560 600 330
5.6 560 620 660 300
6.0 600 660 700 450
7.0 700 760 800 500

Product structure

T35 axial flow fan structure - inlet, outlet, integrated impeller, carbon steel casing, metal guard mesh

Fig.: T35 axial flow fan structure — inlet / outlet / integrated impeller / carbon steel casing / metal guard mesh

Working conditions and standard configuration

Working conditions

Working temperature -20 °C ~ +40 °C
Humidity below 90%
Standard type medium Non-corrosive, non-flammable, non-explosive gas (dust content ≤100 mg/m³)
Explosion-proof type medium Non-corrosive gas containing flammable and explosive components (dust content ≤100 mg/m³)
Anti-corrosion type medium Corrosive gas (no dust at all)
Power supply Three-phase 380 V/50 Hz (single-phase 220 V available for small motors, please specify)

Standard configuration

Impeller · motor · casing (air duct, motor bracket) · base feet

Optional parts and accessories (please specify when ordering)

Vibration isolators · control box · guard mesh · matching flange · louvre grille · silencer (various lengths)

Product photos

Custom sizes available — contact us for your requirements

T35 axial flow fan Unit, three-quarter view
T35 axial flow fan Side view with guard mesh
T35 axial flow fan Impeller, front view
T35 axial flow fan Motor end, side view

Applications

F

Factory workshops

Exhaust for hot and humid workstations; wall-mounted or duct-mounted units both work.

W

Warehouses

Daily air exchange, dehumidification and odour removal; airflow selected by room volume.

O

Offices

Low-noise ducted supply and exhaust; long ducts can use several fans in series.

R

Residential buildings

Kitchen and bathroom exhaust, basement air exchange; small single-unit airflow.

FAQ

Q: How noisy is the T35 axial fan, and where can it be installed?

A: The fan body runs at about 60–75 dB(A), and with a silencer box it can be reduced to below 55 dB(A). For general industrial plants and warehouses the unit can be installed as it is; in noise-sensitive offices, hospitals and schools fit a silencer box or choose a low-speed model.

Q: How do I select airflow and pressure, and how long a duct can I use?

A: Calculate the airflow from the room area and the required air changes per hour, then determine the pressure from duct length, bends and filter resistance. A straight duct run is normally kept within 15 m; beyond that, add a second fan of the same model in series at mid-run so terminal airflow does not drop off.

Q: What is the difference between wall mounting and duct installation?

A: Wall mounting fixes the fan directly into a wall or window opening; the fan carries an insect and rain guard and is used for direct exhaust. Duct installation puts the fan in line inside the ducting, with inlet and outlet flanges, for a planned ventilation system.

Q: Is the motor copper or aluminium wound, and what is the warranty?

A: All DeLENG axial fans use pure copper windings with IP54 protection, suitable for damp and dusty areas. The complete unit carries a 3-year warranty and the motor 5 years; standard sizes are held in stock.

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a axial Flow Fan?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top