The DeLENG FRP axial flow fan is built from high-strength glass fibre reinforced plastic (FRP): both the casing and the impeller are FRP, so it resists corrosion, acids and alkalis. It is the fan of choice for corrosive ventilation in chemical plants, metallurgy, power generation and wastewater treatment.

The DeLENG FRP axial flow fan is made from high-strength glass fibre reinforced plastic (FRP). Its outline and dimensions are the same as the steel axial flow fan — what sets it apart is that both the casing and the impeller are FRP, which gives outstanding resistance to corrosion, acids and alkalis and makes it a leader among anti-corrosion fans.
It is designed for corrosive environments in chemical plants, metallurgy, power generation and wastewater treatment, and provides a durable, stable ventilation solution. Compared with metal, FRP has lower density and higher strength: the fan weighs less, is easier to install and maintain, and still runs efficiently under harsh conditions.
Service hotline: +86 534 2555668
Corrosion resistance · high-strength structure · light yet strong · energy efficient
FRP construction with very strong resistance to corrosion, acids and alkalis — suitable for all kinds of corrosive gas duty.
FRP gives the fan greater strength and rigidity, so the structure stays stable in harsh conditions with less vibration and noise.
Lower density and higher strength than metal — the unit weighs less, which makes installation and maintenance easier.
An optimised impeller design delivers high airflow at low energy input, cutting running cost.
Quality details you can see — built for your satisfaction
FRP axial flow fan selection data · three-phase 380 V/50 Hz
| Model | Speed(r/min) | Power(KW) | Airflow(m³/h) | Weight(kg) |
|---|---|---|---|---|
| 3.5 | 2900 | 1.1 | 6122 | 65 |
| 4 | 2900 | 1.5 | 6524 | 75 |
| 4.5 | 2900 | 2.2 | 7981 | 90 |
| 5 | 2900 | 3.0 | 9824 | 110 |
| 5.5 | 2900 | 4.0 | 12693 | 115 |
| 6 | 2900 | 5.5 | 16090 | 164 |
Working temperature: -20 °C to +40 °C (continuous duty);
Humidity: below 90%;
Medium: air (dust content not more than 100 mg/m³);
Power supply: three-phase, 380 V/50 Hz.
Strong manufacturing base · custom sizes on request
Ventilation for corrosive gases.
Anti-corrosion ventilation in metallurgical workshops.
Ventilation in power plant buildings.
Corrosion-resistant ventilation for sewage works.
A: Both the casing and the impeller of the FRP axial fan are made of high-strength glass fibre reinforced plastic. The outline and dimensions are the same as the steel fan, but resistance to corrosion, acids and alkalis is far better than metal and the unit is lighter and stronger — which makes it the right choice for chemical plants, metallurgy, power generation and wastewater treatment.
A: FRP withstands acids, alkalis and corrosive gases very well, so it suits long-term ventilation in chemical workshops, electroplating plants, wastewater treatment works, metallurgical smelting and other corrosive environments.
A: Yes. Any specification can be built to order and we take on complete project orders. Selection is made from the system resistance and the required airflow — send us the project data and the DeLENG technical team will confirm the model.
A: The fan uses a low-noise design and a silencer box can be fitted. It runs continuously at -20 °C to +40 °C; it can also run for 20 hours continuously at 100 °C and for 30 minutes at 280 °C. Medium: air with dust content not more than 100 mg/m³.
A: The table lists speed, power, airflow and weight for each model; match the model to the airflow and system resistance you need. The DeLENG technical team can confirm the selection for you.
Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer
A genuine source factory with in-house R&D, so the price stays genuinely competitive.
Self-inspected and tested unit by unit, which is why buyers trust us.
Ample stock and large ready quantities, so supply capacity is strong.
Sample-based customisation and non-standard machining — call us to discuss.
