Home›Products ›Axial Fans ›Wall-mounted Axial Fan

Wall-mounted Axial Fan

Dezhou DeLENG · factory direct supply 

Wall-mounted Axial Fan

The DeLENG WEX (DWEX) wall-mounted axial fan uses forward-swept blades driven directly by a low-noise motor. Its square casing and rain hood make wall installation easy, and anti-corrosion or explosion-proof versions are available on request.

Forward-swept bladesSquare casing with rain hoodWall mountingAnti-corrosion and explosion-proof optionsHigh airflow, low noise
wall-mounted axial fan

Product introduction

The DeLENG WEX (DWEX) series wall-mounted axial fan, also known as the WEX wall fan, uses advanced forward-swept blades driven directly by a low-noise fan motor. Its square casing installs easily in concrete walls, brick walls or light-gauge steel sandwich panels, and the square rain hood is sturdy and clean-looking. It combines low noise, high airflow, reliable running, a wide performance range and simple installation, and is widely used for side-wall ventilation and air change in factory workshops and in civil and commercial buildings.

The WEX (DWEX) series is normally used for side-wall exhaust with a 45° rain hood (60° is available as a special build) and an insect screen, so insects drawn in by workshop lights at night are kept out. It can also be built as a side-wall supply fan, model DWSP (WSP), fitted with a 90° rain hood that keeps out wind, rain and dust, plus an insect screen. The WF series uses an energy-saving low-noise wall impeller with direct motor drive and an all-copper motor with copper windings; speed runs up to 2800 r/min, and the fan is energy-saving, quiet and easy to clean.

Depending on the medium handled, anti-corrosion or explosion-proof versions can be built. A louver can be fitted at the outlet so the workshop stays isolated from outdoors while the fan is off. A gravity backdraft damper (louver) is available as an accessory — please state it on the order.

Service hotline: +86 534 2555668

Key features of the wall-mounted axial fan

E

Efficient and quiet

Forward-swept blades plus direct drive from a low-noise motor give high airflow, steady running and low noise.

S

Simple installation

The square casing installs easily on every common wall type; the rain hood is sturdy and looks clean.

C

Custom anti-corrosion and explosion-proof

Anti-corrosion or explosion-proof fans can be supplied to suit the medium handled and harsh environments.

R

Reliable operation

Wide performance range, stable running and simple maintenance keep the fan efficient over a long service life.

Product details

Quality details you can see — built for your satisfaction

wall-mounted axial fan Low noise, high airflow
Low noise, high airflow

Quiet, high airflow, reliable running, a wide performance range and simple installation — widely used for side-wall ventilation in factory buildings and civil or commercial premises.

wall-mounted axial fan Square casing and rain hood
Square casing and rain hood

The square casing installs easily on concrete walls, brick walls or light-gauge steel sandwich panels, and the square rain hood is sturdy and clean-looking.

wall-mounted axial fan Anti-corrosion and explosion-proof versions
Anti-corrosion and explosion-proof versions

Built to suit the medium handled: anti-corrosion or explosion-proof versions cover ventilation duties in harsh environments.

wall-mounted axial fan Forward-swept blades, direct drive
Forward-swept blades, direct drive

Advanced forward-swept blades driven directly by a low-noise external-rotor or internal-rotor fan motor.

Performance parameters

DWEX (WEX) series wall-mounted fan performance data

Model No. Airflow(m³/h) Static pressure(Pa) Power (kW) Noise dB(A)
2.5 1000 35 0.09 ≤57
3.0 2000 59 0.15 ≤60
3.55 3265 98 0.27 ≤65
4.0 5300 167 0.37 ≤64
4.5 6778 160 0.55 ≤63
5.0 9300 167 0.75 ≤65
5.6 12300 190 1.1 ≤66
6 18000 230 1.5 ≤68
7 24300 270 2.2 ≤68
8 27800 330 4 ≤68

Note: fans can be built as standard, explosion-proof, high-temperature, damp-proof or oil-proof units to order.

Dimensions

Wall-mounted axial fan outline dimensions (A · B · L1 · L2)

wall-mounted axial fan outline and structure dimensions

Dimension table

DWEX (WEX) series wall-mounted fan outline dimensions (mm)

Model Fan outline A Fan length L1 Fan overall width Fan overall length
250 310×310 250 370×370 540
300 370×370 250 430×430 590
350 420×420 250 480×480 640
400 470×470 310 530×530 750
450 520×520 310 580×580 800
500 570×570 310 630×630 850
550 620×620 310 380×380 900
600 700×700 480 760×760 1200
700 770×770 480 830×830 1300

Note: the models above are kept in stock in quantity; sizes 8 to 11.2 are made to order because of their physical size. These dimensions are our standard stock sizes and are subject to change without notice; custom sizes, colours and styles can also be built to the customer’s own data.

Product photos

Shown from several angles · fine workmanship · honest service

wall-mounted axial fan Angled air guide hood
Angled air guide hood

Grey-blue square casing with an angled air guide hood and a black power cable (with coloured cores) led out from the side; the surface is bolted, giving a sturdy, regular structure.

wall-mounted axial fan Round perforated intake panel
Round perforated intake panel

The top of the silver-grey square casing is an angled intake panel with dense round perforations for smooth airflow at low resistance and a clear metal finish.

wall-mounted axial fan Hexagonal outlet hood
Hexagonal outlet hood

The front of the casing carries an angled hexagonal outlet hood with a metal mesh guard bolted at its edge, so intake protection is dense and reliable.

wall-mounted axial fan Motor direct drive
Motor direct drive

The black fan motor and impeller (with a red marker) are visible at one side of the casing and connect to the square outlet hood, fixed with metal flanges and bolts, with nameplate labels on the surface.

Applications · side-wall ventilation

W

Workshops and factories

Side-wall ventilation and air change for workshops.

C

Commercial buildings

Wall exhaust for commercial premises.

H

Homes and residential buildings

Wall ventilation for residential buildings.

S

Steel-frame structures

Concrete walls, brick walls or light-gauge steel structures all work.

FAQ

Q: Where is the wall-mounted axial fan best installed?

A: It is designed for side-wall ventilation and air change in workshops, factories, offices and residential buildings. The square casing installs easily on concrete walls, brick walls or light-gauge steel sandwich panels, giving indoor-outdoor air change with simple installation and no floor space taken up.

Q: Can the rain hood and insect screen be chosen to suit the site?

A: Yes. The square rain hood is sturdy and clean-looking, and 45°, 60° or 90° hoods can be selected for the installation direction to keep rain from flowing back. An insect screen can be added to stop insects and debris entering the fan, which extends its service life.

Q: Is the fan noisy?

A: Forward-swept blades combined with a low-noise fan motor in direct drive keep running steady and quiet. The whole range is ≤57 to 68 dB(A) depending on the model, which meets the noise requirements of most civil and industrial sites.

Q: How do I choose the right model?

A: Determine the required airflow and pressure from the room volume, air-change rate and system resistance, then select the model from the performance table (sizes 2.5 to 8, airflow 1000 to 27800 m³/h, pressure 35 to 330 Pa). If you would like help with selection, send your project data to DeLENG technical support on +86 534 2555668.

Q: Do you support anti-corrosion, explosion-proof and custom builds?

A: Yes. Fans can be built as standard, explosion-proof, high-temperature, damp-proof or oil-proof units to suit the medium handled; sizes 8 to 11.2 are made to order because of their physical size, and custom sizes, colours and styles are also supported. A louver can be fitted at the outlet so the workshop stays isolated from outdoors while the fan is off, and a gravity backdraft damper is available as an accessory.

Related products

Why choose DeLENG?

Dezhou DeLENG Air Conditioning Co., Ltd. · HVAC equipment manufacturer

01

Factory direct

A genuine source factory with in-house R&D, so the price stays genuinely competitive.

02

Quality assurance

Self-inspected and tested unit by unit, which is why buyers trust us.

03

Stable supply

Ample stock and large ready quantities, so supply capacity is strong.

04

Custom manufacturing

Sample-based customisation and non-standard machining — call us to discuss.

Need a wall-mounted Axial Fan?
Send your project parameters — the DeLENG technical team selects for you free of charge, factory direct supply, custom sizes available.
Contact us now+86 534 2555668
Scroll to Top